let say you have 4" dia. of pipe and 10 welds
so the total diameter inch of weld are
4 x 10 = 40 dia. inches
At first, the area of cross section of the weld, length of the weld, volume of the weld in cubic inches, weight of weld in cubic inches. To express in formula: Weight of Weld Metal = _ Êx ÊBase Êx ÊHeight Êx ÊLength Êx ÊWeight of Material.
Circumference of a circle in inches = 2*radius*pi or diameter*pi Both radius and diameter must be in inches
2r = dIf you calculate the formula correctly, the diameter would be 24 inches.
A socket weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a valve or fitting, and then fillet welded between its outside diameter and the fitting end. Generally used for piping whose nominal diameter is 2 inches (50 mm) or smaller.
It varies from 3 inches to 13 inches. The electrode type, type of weld, and position of weld all determine how far you can get done with a single rod
Area = pi*r2 where r is the radius. So Area = 28 sq inches gives radius = 2.985 inches and then, diameter = 2*radius = 5.971 inches.
You can use the formula for the volume of a cylinder to calculate that.
168.8 cubic inches
11"
The inches in a diameter = 2 X inches in the radius. Or, inches in a diameter = inches in circumference / pi
The formula to calculate the circumference of a circle is C = πd, where C is the circumference, π is the mathematical constant pi (approximately 3.14159), and d is the diameter of the circle. Given a diameter of 26 inches, you would plug this value into the formula to find the circumference: C = π(26) = 81.681 inches. Therefore, the circumference of a circle with a diameter of 26 inches is approximately 81.681 inches.
What is a "8 inch ball" ? Is 8 inches the diameter ? Then its diameter is 8 inches. Is 8 inches the radius ? Then its diameter is 16 inches. Is 8 inches the circumference ? Then its diameter is about 2.546 inches (rounded).