measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe
When you calculate the volume of pipe(or cylinder, as I prefer calling it), you need to know 2 things; the height of the cylinder and the radius of the circle(base of the cylinder). Then you use this formula; hpr^2 (height * pi * radius)
Calculate the (diameter of the pipe (D) divide by 2) squared X pi * length and this will give you the volume. eg Volume = (D/2)2 X Pi X Length. (or R2 X Pi X Length) (Use 3.14159265359 as an approximation for Pi.) In practice, 11/14 Times Diameter is used in lieu of (R2 X Pi) as a quick and dirty but near enough approximation.
You need the inside radius (1/2 the inside diameter) of the pipe and the pipe's length. Then, use this formula:Volume = Pi x r2 x length
If we assume that the pipe is completely full of oil, it would just be the volume of the pipe = pi * r2 * l, where pi = 3.14159, r = radius, and l = length of the pipe. If the pipe is not full, then multiply the volume by the percentage of oil in the pipe. For example, if 50% full, then multiply by .5. If the pipe bends, take into account the different volume of the bend. If the bend is 90 degrees, this can be accomplished by taking the average length of the two bent segments for the length.
In terms of volume: infinite - there is no limit to how long the pipe can be!
Find the volume in cubic feet and multiply by 7.48
Go to: http://www.techcalcs.com/calculators/pipeprop.php and use the calculator Otherwise calculate the volume displaced by the pipe and multiply by the density of the displaced water. This gives the bouyancy of the pipe
267
You need to know the radius (1/2 the inside diameter) and the length of the pipe. Then, you use this formula to calculate the volume:Pi (3.1416) x r2 x length
Use the formula for a cylinder.
This cannot be done without knowing both the width and length of pipe.
no
The volume of water in a 4-inch diameter, 1-foot section of pipe is 0.6528 gallons of water.
The volume of water in a 1 inch x 100 foot pipe is: 4.08 US gallons.
When you calculate the volume of pipe(or cylinder, as I prefer calling it), you need to know 2 things; the height of the cylinder and the radius of the circle(base of the cylinder). Then you use this formula; hpr^2 (height * pi * radius)
There need not be any water in the pipe! The volume of the pipe is 1044 Imperial gallons
The volume of water in 1,500 feet of six-inch pipe is: 294.52 cubic feet or 2,203.2 US gallons.