If we assume that the pipe is completely full of oil, it would just be the volume of the pipe = pi * r2 * l, where pi = 3.14159, r = radius, and l = length of the pipe.
If the pipe is not full, then multiply the volume by the percentage of oil in the pipe. For example, if 50% full, then multiply by .5.
If the pipe bends, take into account the different volume of the bend. If the bend is 90 degrees, this can be accomplished by taking the average length of the two bent segments for the length.
You need to find the density of the oil, from this you will be able to calculate the volume.
You can't. It's impossible.
It is not possible to calculate the area given only the volume.
You cannot calculate volume of surface area. If you meant 20m3, then the volume would be 20,000 litres.
Not enough information. To calculate mass, you would need volume and density (mass = volume x density).
To calculate the volume of biogas in a pipeline, you need to know the pipeline's dimensions (length and diameter) and the pressure and temperature of the gas inside. Use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature. Solve for V to find the volume of biogas in the pipeline.
To calculate the quantity of nitrogen gas needed for purging a pipeline, you would first need to determine the volume of the pipeline. Once you have the volume, you can use the ideal gas law (PV = nRT) to calculate the amount of nitrogen gas required. Make sure to consider factors such as the desired flow rate, pressure, and temperature during the purging process.
Grane Oil Pipeline was created in 2003.
Adria oil pipeline was created in 1990.
To calculate the flow rate in a pipeline, you can use the formula Q = A * V, where Q is the flow rate (volume per unit time), A is the cross-sectional area of the pipeline, and V is the velocity of the fluid in the pipeline. The units of flow rate are typically volume per unit time (e.g., cubic meters per second). You may need to know the density of the fluid flowing in the pipeline to convert the flow rate to a mass flow rate.
the max temp of oil in the pipeline is 145 Fahrenheit
calculate the no of pipes in the circuit & then work out the volume based on the area.
there is a lot of Asians so they like the pipeline. Asians want oil. the pipeline gives oil to asia
usually oil
The volume is the ratio Mass/Density. You need the density of this oil to calculate the volume. Or - weight 75 g oil in a graduated cylinder and read the volume.
The pipeline stops in Valdez Alaska. The oil then is put and an oil tanker and sent to Washington. Ever heard of the Exon Valdez? Pipeline oil.
You need to find the density of the oil, from this you will be able to calculate the volume.