Length X Width X Avg depth X 7.5=gal
You need three measurements, length, width, and depth, to calculate the volume of the pool
You could calculate it by finding the volume of water in the pool (in cubic metres), the average depth of the pool (in metres) and the width of the pool (also in metres).Then, linear metres = volume/(average depth*width).However, rather than calculating the linear metres, it might be simpler to just measure the length of the pool.
It is necessary to know the length as well as the width and depth of the pool in order to calculate its volume.
how do i calculate the volumn of backwash in a pool
A round swimming pool is a right circular cylinder, so you can use the formula pi times the radius squared times the height to calculate the volume.
To calculate the volume of water needed to fill a rectangular pool, multiply the length, width, and depth together. Assuming the depth is 4 feet, the volume of this pool would be 48 ft x 24 ft x 4 ft = 4,608 cubic feet of water.
Here's a good resource and the formula necessary to calculate water volume in a swimming poo... http://www.backyardcitypools.com/swimming-pools/Pool-Volume-Calculate.htm (may need to copy/paste link) Hope this helps.. Terry Duff
3 dimensions are required to calculate the volume of a pool or anything else: Length x width x height. The formula for the volume of circular pools is Pi x radius squared x dept.
It depends on the size of the swimming pool. First, figure out how big your cup is (the max volume it can hold) then how big your pool is (max volume of the pool). Divide the volume of the pool by the volume of the cup. That will be your answer. Ex: the cup's volume is 8 cm cubed and the pool's volume is 8000 cm cubed.dived 8000 cm3 by 8 cm3:8000/8 = 1000Therefore, the answer to this example is that there are 1000 cups of water in the swimming pool.
length(M) x width(M) x average depth(M) you will get pool volume in cubic meter. convert it in to gallons or any other unit
Assuming the cross-section is a circle, and the walls go straight down, just use the formula for a cylinder.
The volume of water displaced is equal to the volume of the object submerged into the water