To change the temp display from F to C or vice versa (like when the battery is disconnected) you press the Temp down arrow & the Amb buttons for about 5 seconds. Then the display will change. Hope you still need this & it helps. Happy New Year, CT Toolman.
how much freon does a 2004 kia soenrto 3.5 hold for a/c
Where is the low pressure a/c inlet
You can use a large C-Clamp to compress the caliper piston.
hold down the AMB and the down Temp button for like 3 seconds and it will switch
My 2006 Sorento has a protector plate under the engine---you can drain the oil without removing the plate if you have a funnel that can be pointed towards a hole in the protector plate, but it is a tight fit. Removing the plate will expose the oil pan and drain plug as in all engines. C. Fox foxc@unt.edu
A temperature change by one degree on Celsius scale equals temperature change of 1.8 degree on Fahrenheit scale or F (Fahrenheit) = 1.8 C (Celsius) + 32
Check and make sure that the a/c heater control door is working and if so then check the actuators the vacuum and the controller as well..............
212 F or 100 C
F= (c*9/5)+32
Use this formula: K = (C + 273.15)
4° C is the temperature of maximum density for water. Change temperature in either direction from there -- whether you warm it or cool it -- the density decreases.
E = mass x specific heat x Δ°T Δ°T = new temperature - original temperature where Δ°T is equal to temperature change (Celsius in this case). The specific heat of Al is 0.900 J/g°C. Before we proceed to find the quantity of heat in joules, we must first find the temperature change. To calculate the temperature change, we must subtract the original temperature from the new temperature. Δ°T = 50°C - 25°C = 25°C In order to find the quantity of heat (joules), we must multiply mass, specific heat, and the temperature change (calculated above). E = 40.0g x 0.900 J/g°C x 25°C = 900 Joules or 9.0 x 102 Joules