0
With a properly sized wire nut. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use an electrician's test meter having metal-tipped probes (not a simple proximity voltage indicator) to insure the circuit is, in fact, de-energized.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What if the light fixture has two copper house wires?
If you mean 2 bare copper wires those are the ground wires. Tie them together and then connect the light fixture ground wire which will be green or bare copper to those ground wires.
Install light fixture to 6 wire?
usually you segregate them. all whites together all blacks together all non-coated copper wires and/or green coated wires together use wire nuts to connect above-mentioned wires together
What is the advantage of stranded wires?
Flexibility is the main advantage of stranded wires; however for high frequency AC (i.e. radio frequencies), stranded wires increase the surface area, minimizing the skin effect (i.e. high frequency current avoiding the core of a wire, increasing its resistance at that frequency). This is not an issue at typical power frequencies (e.g. 60Hz) as the skin effect is still insignificant at those frequencies.
How do you wire a 4way switch?
Connect all white wires together under a wire nut and push them back into the box. Connect all ground wires together and then connect them with a jumper wire to the ground screw on the switch. Connect black power in and power out, if applicable, wires to the bottom screw on the switch. Connect the remaining black wire going to the light to the top screw on the switch.
How do you install a 20 amp switch for well pump?
Black/White/Ground power in and the same out. Tie the incoming and outgoing white wires together under a yellow wire nut and push them back in the box. Tie the ground wires together under a green wire nut and connect the pigtail from those ground wires to the ground screw on the switch. Connect the 2 black wires you have left to the 2 screws on the switch. Doesn't matter which black wire you connect to which screw.
Can you connect copper wires to tin coated copper wires?
Yes. You can twist them together and wire nut them, or solder them together.
What if the light fixture has two copper house wires?
If you mean 2 bare copper wires those are the ground wires. Tie them together and then connect the light fixture ground wire which will be green or bare copper to those ground wires.
Install light fixture to 6 wire?
usually you segregate them. all whites together all blacks together all non-coated copper wires and/or green coated wires together use wire nuts to connect above-mentioned wires together
Why would you connect wires to a penny?
Answer why does the person who made a circuit a probably connect the wires to a penny
Why are there are many insulated copper wires instead of a single long wire in electrical appliances?
Because copper can connect one thing to another so there are multiple wires to connect multiple things
How do you connect copper wires to battery?
i will tell you how if you tell me what this project is called,it uses light bulb, copper wires,holder,6 volt battery.
What metal is mostly used with copper coated wires?
Wires are made of copper and sometimes coated with silver for use at frequencies above 1 GHz. Wires used on overhead power lines are usually stranded aluminimum with inner strands of steel.
What do you use to couple 10 gauge wire together?
The electrical terminology for this device is a wire nut. If the two #10 wires are solid, twist the two stripped ends together with pliers and apply the nut to the wire ends. If the two # 10 wires are stranded lay the two stripped ends parallel to each other and apply the wire nut. Do not twist the stranded wires together.
Why are copper wires used in as connecting wires?
The copper wires used connect. Because conductivity of Cooper higher than aluminium but price of Cooper higher than aluminum. If compare between copper and aluminium cable can see at the same current rate diameter of aluminium cable is larger than copper cable.
How can students determine that an object conducts electricit?
One way is to connect it with copper wires and connect the copper wires with a light bulb's base where it is inserted into a socket. Usually it's a metal that would most likely conduct. Non-metals conduct very little or not at all.
Why stranded wires are twisted?
Stranded conductors are made up of many smaller solid conductors. In order to bunch the solid conductors to make the stranded wire they have to be held together. The simplest way of doing this is to twist them together. Once the solid wires are twisted together they are drawn through a machine that applies the insulation coating which holds the solid wires together. The final result is a insulated stranded conductor that has good flexibility. With this flexibility multiple stranded conductors can be easily be drawn through conduit systems that incorporate up to four 90 degree bends between junction boxes.
How do you connect a 10 gauge wire to an 8 gauge wire?
Connecting different gauge wires are just like connecting wires of the same gauge. Connect the wires just as you normally would, and then once the you attach the wire nut, give the thinner wire a slight tug to make sure the wire is securely fastened. Usually when attaching fixtures, they are generally stranded wires. Be sure to twist the strands together before twisting them onto the solid wire. Then attach the nut onto them and tighten it securely. Connecting different gauge wires are just like connecting wires of the same gauge. Connect the wires just as you normally would, and then once the you attach the wire nut, give the thinner wire a slight tug to make sure the wire is securely fastened. Usually when attaching fixtures, they are generally stranded wires. Be sure to twist the strands together before twisting them onto the solid wire. Then attach the nut onto them and tighten it securely.
