This question does not make any sense. A cubic foot per minute is a measure of the rate of flow, with dimensions [L3T-1]. A knot is a measure of linear speed, with dimensions [LT-1]. Basic dimensional analysis teaches that in most cases you cannot convert between measures with different dimensions without additional information.
cubic feet per hour x 0.471947443 = liters per minute
Standard cubic feet per minute in regards to water can be converted to inches. What you will do is first calculate the cubic feet. Next, convert the cubic feet into cubic inches by using the standard measurement of 1 cubic foot being 1,728 cubic inches.
Easy to do. Multiply cubic yards by 27 to get cubic feet.
I use a conversion program I found on the internet. It states that 1 Cubic Meter/hour = 563.567 Ounces/Minute. Divide 563.567 by 16 and you get 35.22 Pounds per Minute. (I think) Does that sound close to the answer you were looking for?
100 cubic feet is 0.002295684 acre-feet.
cubic feet per hour x 0.016666667 = cubic feet per minute
Multiply cubic feet per second by 60 to get cubic feet per minute.
cubic feet per second x 60 = cubic feet per minute
Cubic feet per minute x 28.3168 = liters per minute
Multiply liters per minute by 0.0353146667 to get cubic feet per minute.
Use this formula to convert gallons per minute to cubic feet per second:gallons per minute x 0.002228 = cubic feet per second. So; 500 x 0.002228 = about 1.114 cubic feet per second.
You cannot without knowing the dimensions and shape.
cubic feet per hour x 0.471947443 = liters per minute
Divide by 60.
liters per minute x 2.1189 = cubic feet per hour
300 cubic meters per hour is about 176.57 cubic feet per minute.Formula: Cubic meters per hour x 0.5886 (rounded) = cubic feet per minute
You can't convert those units. Milimeters of water (mmH2O) is a unit of pressure equal to about 13.6 mmHg. Cubic feet per minute is a measure of fluid flow.