The best way is with a lookup table.
The Gray Code is a type of binary code developed by a programmer named Frank Gray. Gray code is a binary numeral system that differ than normal binary code, and is used widely to detect errors in software.
One disadvantage of Gray code is that it is not as intuitive for human understanding compared to binary code. Another drawback is that Gray code is not as efficient in terms of mathematical operations, such as addition and subtraction, compared to binary code. Additionally, Gray code requires more bits to represent the same range of values as binary code, which can result in increased complexity and storage requirements.
The reflected binary code, also known as Gray codeafter Frank Gray, is a binary numeral system where two successive values differ in only one bit.Here is an example of a 4-bit Gray code:0000000100110010011001110101010011001101111111101010101110011000
Converting Gray Code to Binary1). Write down the number in gray code.2). The most significant bit of the binary number is the most significant bitof the gray code.3). Add (using modulo 2) the next significant bit of the binary number to thenext significant bit of the gray coded number to obtain the next binary bit.4). Repeat step 3 till all bits of the gray coded number have been added inmodulo 2. The resultant number is the binary equivalent of the gray number.Converting Binary to Gray Code1). Write down the number in binary code.2). The most significant bit of the gray number is the most significant bitof the binary code.3). Add (using modulo 2) the next significant bit of the binary number to thenext significant bit of the binary number to obtain the next gray coded bit.4). Repeat step 3 till all bits of the binary coded number have been added inmodulo 2. The resultant number is the gray coded equivalent of the binarynumber.
gray code is one which changes one bit at a time but binary code is one which changes one or more bit at a time. for example three bit binary and gray code the left one is binary and the right one is gray code.binary gray000 000001 001010 011011 010100 110101 111110 101111 100000 000
characteristic of Gray code
help PLA use convert excess-3 to gray code
gray code is one which changes one bit at a time but binary code is one which changes one or more bit at a time. for example three bit binary and gray code the left one is binary and the right one is gray code.binary gray000 000001 001010 011011 010100 110101 111110 101111 100000 000
The gray code for the decimal number 6 in four-bit format is 1011. To convert from binary to gray code, the most significant bit (MSB) remains the same, and each subsequent bit is derived by XORing the current bit with the previous bit in the binary representation. The binary representation of 6 is 0110, which converts to gray code as follows: 0 (MSB), 1 (0 XOR 1), 1 (1 XOR 1), 1 (1 XOR 0), resulting in 1011.
It can be implemented very easily .... Suppose the Binary word is X7X6X5.... X0 then the corresponding Gray code is G7G6G5....G0 where G7=X7 G6=X7 XOR X6 G5=X6 XOR X5 ..... G0=X1 XOR X0 Now implement the above algorithm
I do not believe that is a valid binary number. All binary numbers must be divisible by 8
BCD codes,gray code,error detecting code,ASCII character code,Excess 3 code