"hank per hour"? Maybe you made a typo. Please resubmit the question
Not in any sensible way. RPM is a measure of (angular) velocity whereas litres per minute is a rate of flow. Your hard disk will have an rpm but what does litres per miute mean in terms of the disk?
You have to know how far the measurement point is from the center of the rotation.The farther out it is, the more meters per second it will cover.(At the same RPM, a 10-ft tractor tire covers more meters per second than a skate-board wheel does.)When you know the 'radius' of the wheel in meters,the speed of a point on the rim is(Radius) times (pi/30) times (RPM) = (Radius) times (0.1047) times (RPM) meters per second. (rounded)
You cannot, the terms are incompatable.
RPM Revs Per Minute (how many times it spins round) is all to do with the cogs or gears linking the motor to the end shaft. The smaller the gear the greater rpm the bigger the gear the slower rpm. Someone although did tell me that 3000 rpm is 80 mph but that is false, it all depends on the gears.
It's usually measured in RPM - Revolutions-Per-Minute, counted at the crankshaft.
RPM, revolutions per minute, cannot be converted to miles per hour unless additional information is known. In general you need t know the radius around which the object rotates to calculate the miles per hour with which it is moving. In an automobile, you need to know the gear ratio and tire size before you can convert RPM to the miles per hour at which the vehicle is moving.
all you have to do is convert it..........
Divide the RPM by 60.
1 revolution = 2π radians 1 minute = 60 seconds → 1 rpm = 1 revolution / 1 minute = 2π radians / 60 seconds = π/30 radians/seconds = π/30 rad per sec → to convert rpm to rad per sec multiply by π (pi) and divide by 30.
The answer depends on how big the tyre is!
Not in any sensible way. RPM is a measure of (angular) velocity whereas litres per minute is a rate of flow. Your hard disk will have an rpm but what does litres per miute mean in terms of the disk?
To convert speed from meters per second (m/s) to revolutions per minute (RPM), you need to know the circumference of the rotating object. Without that information, it is not possible to directly convert mach 0.8 or 272.23 m/s to RPM. RPM is a measure of rotational speed, whereas mach is a unit of relative velocity to the speed of sound.
12 mph (Miles Per Hour) And the gear ratio is 2.90909091:1the motor is 2909.09091 RPM the wheels RPM is 1000
122 cubic feet to rpm??
To start you'll need to know the CF/M of the engine at that RPM. From there, you're on your own.
1500g
You cannot in any sensible way. RPM is a measure of (angular) velocity whereas litres is a measure of volume. Your hard disk will have an rpm but what does litres mean in terms of the disk?