0
What else can I help you with?
How many tons of sand to fill 24ft circle 4 inches deep?
For this, you can work out the volume of the cylinder of sand you need to fill. But you'll also need to know the density of the sand to convert this volume into weight.
How do you convert cubic meter of asphalt to tons?
To convert cubic meters of asphalt to tons, you need to know the density of the asphalt, which typically ranges from about 2,200 to 2,400 kg/m³. Multiply the volume in cubic meters by the density to get the mass in kilograms, then divide by 1,000 to convert to tons. For example, if the density is 2,300 kg/m³, then 1 cubic meter of asphalt would equal approximately 2.3 tons.
How do you convert cubic feet per second in tons per hour?
You cannot. Cubic feet per second is a flow rate measured in terms of volume, while tons per hour is a measure of flow rate in terms of mass. Volume and mass are two different measures and according to basic dimensional analysis, conversion from one to the other is not valid.
How many tons are in 3096 square yards per inch at 9 inches thick?
3096 sq yds by 9 in thick is a volume of 774 sq yards.To convert that to a weight in tons, multiple it by the density of the substance in tons per square yard.
How do you convert ton to cft?
To convert tons to cubic feet (cft), you need to know the density of the material in question. The formula for converting tons to cubic feet is: cubic feet = (tons / density). For example, if you have 2 tons of a material with a density of 100 pounds per cubic foot, the conversion would be: cubic feet = (2 tons / 100 lb/ft^3) = 0.02 cubic feet.
How do you convert tons into pounds?
30 tons to liters You can't convert - tonnes measure weight (mass), litres measure volume.
How do you convert 2.7 million tons into square feet?
you cannot convert mass into volume....
How do you convert cubic feet of rock to tons?
How to convert cubic meters to tons of armour rock with 2.7 specific
How do you convert cubic yards in to tons?
You don't. Cubic yards is volume while yards is distance.
How do you convert 1000m3 into tons?
By multiplying it by the density of the substance (expressed in tonne/m3) that occupies the volume of 1000m3.
How many tons of sand to fill 24ft circle 4 inches deep?
For this, you can work out the volume of the cylinder of sand you need to fill. But you'll also need to know the density of the sand to convert this volume into weight.
Convert 21.38 tons into liters?
Cannot be done because tonnes are units of mass or weight, and litres are units of volume.
How do you convert gallons to tons?
You can't, unless you know what the material is. 1000 gallons of gasoline will weigh less than 1000 gallons of water, which will weigh less than 1000 gallons of mercury. Unless you know the density of the stuff, you can't figure out how much a given volume of it will weigh.
How do you measure tons of gravel in in a stockpile?
To measure tons of gravel in a stockpile, you can use the formula for volume calculation by taking length x width x height. Then, you can convert the volume to weight by multiplying it by the density of gravel, typically around 1.5 tons per cubic yard. This will give you an estimated weight of gravel in the stockpile in tons.
How do you convert cubic meter of asphalt to tons?
To convert cubic meters of asphalt to tons, you need to know the density of the asphalt, which typically ranges from about 2,200 to 2,400 kg/m³. Multiply the volume in cubic meters by the density to get the mass in kilograms, then divide by 1,000 to convert to tons. For example, if the density is 2,300 kg/m³, then 1 cubic meter of asphalt would equal approximately 2.3 tons.
How do you convert ethanol in liters to tons?
To convert ethanol liters to tons, you need to know the density of ethanol. The density of ethanol is about 0.789 kg/L. To convert kilograms to tons, divide by 1000. So, to convert ethanol liters to tons, you would multiply the volume in liters by 0.789 (density of ethanol) and then divide the result by 1000.
What is the conversion factor from liters to tons?
A liter is a measurement of volume. A ton is a measurement of weight. You cannot convert directly between the 2.
