They do not directly convert. Cubic feet is a measure of volume while square feet is a measure of area.
You can't figure that out. You can't just add a third demention.
A measurement in square feet is a measurement of area, while a measurement in cubic yards is a measurement of volume. The two units are, therefore, incompatible.You can, however, convert between square feet and square yards, or cubic feet and cubic yards.
It depends on how thick each square foot is! Actually, a square foot isn't "thick" at all, so you could theoretically stack up an infinite number of them and still not reach the one foot high you would need to make a cubic foot. (cubic feet) = (square feet) × (height in feet)
Cubic feet is a measure of volume while square feet is a measure of area. They do not directly convert.
Does not compute. Cubic feet is a measure of volume. Square feet is a measure of area.
"Square cubic anything" is an unknown unit.=> If you have a number of square inches of area, divide the number by 144 to get the number of square feet.241,920 square inches = (241,920 / 144) = 1,680 square feet=> If you have a number of cubic inches of volume, divide the number by 1,728 to get the number of cubic feet.241,920 cubic inches = (241,920 / 1,728) = 140 cubic feet=> If you have a number of square cubic inches, then you've made a serious blunder somewhere up the line. You should repeat your work.
If you are asking for "square" feet, the depth is irrelevent. The area would be 85 square feet If you want a figure which takes the depth of 4 inches into the account, the number of "cubic feet" would be roughly 28 cubic feet.
You have given three measurements, which would make a solid figure of 128 cubic feet
There are an infinite number of square feet in a cubic foot. This is because a square foot defines a 2D plane, and 2D objects have no depth. They are infinitely thin and therefore there would be an infinite number of square feet in a cubic foot. Square feet have dimensions L2 while cubic feet have dimensions L3 so they are not interchangeable. If volume units could be converted to area units, then you'd be able to figure out how many acres of gas your car burned last month, and you could go to the store and buy the equivalent of 2 square feet of milk.
1 cubic yard = 27 cubic feet.
Just divide the number of square feet by 9 to determine square yards.
You can't figure that out. You can't just add a third demention.
As an area of square feet has no height, it has no volume which is measured in cubic feet. Thus there are 0 cubic feet in 440 square feet.
Square feet and cubic feet are units of different measurements. Square feet is a unit of area. Cubic feet is a unit of volume.
453.6 cubic feet=138.29 square feet
A measurement in square feet is a measurement of area, while a measurement in cubic yards is a measurement of volume. The two units are, therefore, incompatible.You can, however, convert between square feet and square yards, or cubic feet and cubic yards.
That depends on the depth of the topsoil you will put down. Multiply the number of square feet by the depth of topsoil--that will give you the number of cubic feet. To convert to cubic yards, divide the number by 27. So, for example, if you are using 3" of topsoil over 880 square feet then your calculation would be: 880 times .25 (3" = .25 feet) = 220 cubic feet (divided by 27--there are 27 cubic feet in a yard) equals 8.15 cubic yards.