A clinometer can be used to measure the angle of elevation on the top of the coconut tree. You then measure the distance, D, from your position to the point underneath the top of the coconut tree. Coconut trees are often not straight so this point may not correspond to its base. Then the height of the top of the tree from your eye level, H is given by the formula: H = D*tan(x) so that the tree's full height is H + h where h is the height of your eyes above the ground level.
Using trigonometry and the tangent ratio its height is 135 meters to the nearest meter.
The basic SI (metric) unit for any kind of length or distance (length, width, height, etc...) is the metre (or meter if you're American). Other metric units for height are obtained using multiple-of-ten prefixes - for example, kilometres for thousands of metres, or centimetres for hundredths of metres.
The height of an athlete in metrics is best measured in the metric system, using centimeters or meters. This system provides a more precise and standardized measurement compared to using feet and inches.
Yes.But thaw it slowly,not in the microwave.Put it in the fridge at least a whole day in advance of using it.
The potential energy of the vase can be calculated using the formula: potential energy = mass * gravity * height. Given the mass of 2 kg, height of 1 meter, and acceleration due to gravity of 9.8 m/s^2, the potential energy would be 19.6 Joules.
pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.
A meter is a better estimate for the height of a house, as typical residential buildings are usually between 2 to 3 stories tall, measuring approximately 6 to 10 meters high. A kilometer, which equals 1,000 meters, is far too large to represent the height of a house. Therefore, using meters provides a more accurate and practical measurement for this context.
you can calculate a meter by using maybe a meter stick or a tape measure...
One meter of head is approximately equal to 0.145 psi. This conversion is based on the density of water and the acceleration due to gravity. Specifically, 1 meter of water column exerts a pressure that can be converted using the formula: pressure (psi) = height (meters) × 0.4335. Thus, for 1 meter, the pressure is roughly 0.145 psi.
By drawing a sketch from the given information and then using trigonometry the height of the hill works out as 276 meters to the nearest whole meter.
house with the meter
no