The volume of a cylinder (V) = πr2h, where π=pi, r=radius of the base, and h=height.
Assuming the cylinder has an OUTSIDE diameter of 450mm, the INSIDE diameter is 400mm and the radius (r) is 200mm, or 0.2m. Plug in the values of your cylinder:
V= 3.1415927 * 0.2m * 0.2m * 6.5m = 0.816814m3, or about
816.81 Liters
The volume of a cylinder with a length of 22 and a diameter of 9 is: 1,400 cubic units.
The radius of the cylinder would be 0.64cm ! The radius is half the diameter - length has nothing to do with the question !
A cylinder if the diameter is 124 mm and the length is 170 mm has a surface area of 90,377.34mm2
If you only know the length, and nothing else, you can't. If you know the length and the volume, you can calculate the diameter.
For a cylinder with those dimensions, the volume is (pi) x (Radius2) x (Length), and the Radius is 1/2 of the diameter.
This question cannot be answered because not enough information is provided. It isn't indicated whether 12.5 mm is the length or the diameter and, in either case, the other dimension is missing. In addition, it isn't indicated whether or not the cylinder is solid or hollow and, if hollow, what the wall thickness is.
The internal volume will be the internal diameter times pi times the length.The internal diameter is the outside diameter (57cm) minus twice the wall thickness (2 * 9 = 18cm) = 57 - 18 = 3939 pi * 100 = 12252 cubic centimeters or more than 12 liters
The volume of a cylinder with a length of 22 and a diameter of 9 is: 1,400 cubic units.
That depends entirely on what material it's made from ! The dimensions are irrelevant unless you tell us what it's made from !
Surface area of a hollow cylinder = 2*pi*radius*length measured in square units.
The hollow block sizes in the Philippines are the following:40cm (length) X 20 cm (width) X 4 in (thickness)40cm (length) X 20 cm (width) X 5 in (thickness)40cm (length) X 20 cm (width) X 6 in (thickness
A cylinder with a diameter of 20 cm and a length of 7 cm has a volume of 2,199.11 cm3
if the diameter of cylinder and stroke length of an I.C. engine is greater then the power output is more.
if the diameter of cylinder and stroke length of an I.C. engine is greater then the power output is more.
if the diameter of cylinder and stroke length of an I.C. engine is greater then the power output is more.
there is no area. it is called surface area which is =2(pi)rh+2(pi)r(squared). this is the total surface are of a SOLID cylinder. for an open or hollow one it is =2(pi)rh+(pi)r(squared)
Length, radius ,diameter, circumference