The internal volume will be the internal diameter times pi times the length.
The internal diameter is the outside diameter (57cm) minus twice the wall thickness (2 * 9 = 18cm) = 57 - 18 = 39
39 pi * 100 = 12252 cubic centimeters or more than 12 liters
This question cannot be answered because not enough information is provided. It isn't indicated whether 12.5 mm is the length or the diameter and, in either case, the other dimension is missing. In addition, it isn't indicated whether or not the cylinder is solid or hollow and, if hollow, what the wall thickness is.
The volume of a cylinder (V) = πr2h, where π=pi, r=radius of the base, and h=height.Assuming the cylinder has an OUTSIDE diameter of 450mm, the INSIDE diameter is 400mm and the radius (r) is 200mm, or 0.2m. Plug in the values of your cylinder:V= 3.1415927 * 0.2m * 0.2m * 6.5m = 0.816814m3, or about816.81 Liters
To calculate the mass of a hollow tube, you need to know the outer diameter, inner diameter, and length of the tube. First, calculate the volume of the tube by subtracting the volume of the inner hole from the volume of the outer cylinder. Then, multiply the volume by the density of the material to determine the mass.
The volume of a cylinder with a length of 22 and a diameter of 9 is: 1,400 cubic units.
Surface area of a hollow cylinder = 2*pi*radius*length measured in square units.
That depends entirely on what material it's made from ! The dimensions are irrelevant unless you tell us what it's made from !
if the diameter of cylinder and stroke length of an I.C. engine is greater then the power output is more.
A cylinder with a diameter of 20 cm and a length of 7 cm has a volume of 2,199.11 cm3
if the diameter of cylinder and stroke length of an I.C. engine is greater then the power output is more.
if the diameter of cylinder and stroke length of an I.C. engine is greater then the power output is more.
there is no area. it is called surface area which is =2(pi)rh+2(pi)r(squared). this is the total surface are of a SOLID cylinder. for an open or hollow one it is =2(pi)rh+(pi)r(squared)
Length, radius ,diameter, circumference