The theoretical answer will depend on the shape of the tank; information which you have chosen not to share. The only alternative is to fill the tank and then empty it using a measured container. If, for example, a k litre container can be filled from the tank n times, then the volume of the tank is k*n litres.
You don't have to find the volume ! If gas is put into a closed container, it fills it. The volume of gas in a one liter tank is one liter.
multiply its height,breadth and length
Length x Width x Heigth. General rule to find the volume of anything you want. Note: Factor in the thickness of the glass. Do the inside.
You would also have to know the volume of the tank.You would also have to know the volume of the tank.You would also have to know the volume of the tank.You would also have to know the volume of the tank.
No - kilograms are units of weight - not volume !
You don't have to find the volume ! If gas is put into a closed container, it fills it. The volume of gas in a one liter tank is one liter.
Multiply the length x height x width, and you will find the volume.
You cannot.
multiply its height,breadth and length
-- Multiply the length of the side of the square tank (in cm) by itself, -- Multiply the answer by the depth (in cm) of the liquid in the tank, -- Divide the answer by 1,000 to get the liquid volume in liters.
Build a tank large enough to enclose the structure. Fill tank to brim with water and lowere the structure into the tank. Collect the overspill and measure it's volume. This is the volume of the iron stucture. Now find the density of iron in a physical data book and multiply this figure by the volume of water collected. This is Archimedes Principle
The best way to find the mass is by scale. The best way to find the volume is to submerge the body in a tank or tub filled partially with water (tank or tub must be equipped with volume measurements). The body must be fully submerged to get an accurate reading. Subtract initial volume from final volume (Vf - Vi = volume of object). That's it. If you are looking for densinty, then Density = Mass/Volume.
weigh him, and then find his volume by submerging him in a full tank of water, and measuring the amount of water that has overflowed. Once you have the volume, divide his weight by that, and you will have his density
To solve this we need to find the area of the tank in cubic feet, and then convert that to gallons. The volume of a cylinder can be found by multiplying the area of its base by its height. The area of a circle is equal to Pi×r2, where r is the radius of the circle. The radius is half of the diameter, so the area of the base of the tank if Pi×12, which equals Pi. Multiply this by 5 to find that the volume of the tank is 5 Pi cubic feet. Convert this to gallons to find that the volume is 117.5 gallons.
Assuming we are talking about a common rectangular aquarium. (Length of tank in inches) x (Width of tank in inches) x (Depth of tank in inches) = Volume of the tank in cubic inches Volume/231 = Gallons in tank Please keep in mind that rocks, plants, fish, and decorations reduce the volume of the tank somewhat.
A liter is a measure of volume; we need to calculate the volume of the tank. For this we need to have all three measurements of the tank.
"Area" is an amount of flat surface. It has no volume. If the area is the bottom of a tank, then the volume of the substance in the tank is the area multiplied by the depth.