you take the volume of each cylinder and add them together. the volume is calculated using the bore (width of cylinder) and the stroke (the height of where the piston reached the top [crank angle of 0 degrees] to the bottom [crank angle of 180 degrees]) volume = pi (3.14159) x radius (1/2 bore) squared x height (stroke of the cylinder) that will give you cubic inches per cylinder. Then just multiply by the number of cylinders in the engine.
4.8L has 293 cubic inches.
281 cubic inches
It has 325 cubic inches.
That is 99.71 cubic inches.
293 cubic inches.
330 cubic inches
305 cubic inches
4.3 liter = 262.40209961 cubic inches
378.3 cubic inches.
To convert liters to cubic inches, you can use the conversion factor that 1 liter is approximately 61.024 cubic inches. Therefore, an 8.0 liter Chevrolet motor would be about 488.2 cubic inches (8.0 liters × 61.024 cubic inches/liter).
6.0 litres = 366.142465 cubic inches
about 366 cubic inch 1 liter equals about 61.02 cubic inches