Just remove the old light and install the new pull chain light connecting the black wire to the copper screw and the white wire to the silver screw. There is no connection for the ground wire. Just shove it back into the ceiling box.
yes
no, no it cannot
Look inside the light kit where the light pull chain turns the light on/off. You will find a black box and trace these wires to the pull chain and light if they are not clearly labeled.
Two options. Change the fixture to a keyed pull-chain, or add a pull-chain adapter to the existing fixture. Both available from Home Depot and others for about $3.
I had the same experience. If the fan turns on/off with its pull chain but the light doesn't, then the switch behind the light's pull-chain is broke and needs to be replaced.
The same way.
A dirty or old ceiling fan pull chain switch.
If you reach behind the light you can twist and pull removing the light bulb socket. Pull out the light and install a new one and do the reverse to install.
You put your dickinsider pull it out and she will lite up with a can of millerlite.
Pertaining to what? A light switch, an oven light, a pull chain type lampholder....???
If it is a ceiling fan, then there is a little chain on the base of the fan, not the light chain...usually on the opposite side, that you need to pull and it will change direction.
This sounds very strange. You should not have an unswitched bathroom light. Replace fixture with one with a pull chain. Turn breaker off before changing the fixture.