0
You see how long it takes for each signal and find the average. Example: 1st: 1second 2nd: 3seconds 3rd: 2seconds. So add all and divide by how many terms (3). 1+3+2=6 6/3= 2. The frequency is 2units. I hope this is right.........
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
When low frequency signals added to high frequency signal then the envelope signal will follow which signal?
the low frequency signal which is nothing but the message signalNeither. The envelope will be that of the difference beat frequency. To get the envelope to follow the low frequency input signal you need to mix (multiply) the two signals, not add them.
Is The carrier frequency is usually lower than the modulating frequency?
when the frequency is low , energy will be obviously low. To increase the energy of the signal we need to increase the frequency. This is achieved by multiplying the message signal with the carrier signal (with high frequency).
What happens if we sample the signal at sampling frequency nearer to signal frequency?
If you sample at more than the Nyquist frequency (one half the signal frequency) you introduce an aliasing distortion, seen as sub harmonics.
What is signal modulation?
modulating signal is the message to be carried by the carrier signal.
Is it true or false that in frequency modulations the frequency of the carrier signal is modified by the application of the data signal?
True.
Is the frequency domain plot of a voice signal discrete or continuous?
The frequency domain of a voice signal is normally continuous because voice is a nonperiodic signal.
Can you say whether a signal is periodic or nonperiodic by looking at its frequency domain plot?
Yes. The Fourier transform of a signal to the frequency domain will give rise to a graph that has energy (is greater than zero) at only the base frequency and its harmonics.
What does frequency of a signal measure?
repetition rate of signal
What is frequency meter?
frequency meter is used to measure the frequency of unknown frequency signal.
Define modulation and modulation index?
a measure of the degree of frequency modulation expressed numerically for a pure tone modulation as the ratio of the frequency deviation to the frequency of the modulating signal.
Comparison of amplitude modulation and frequency modulation?
Amplitude of the (high frequency) Carrier signal is varied with respect to low frequency of message signal is called amplitude modulation. Frequency of the carrier signal is varied with respect to low frequency of message signal is called frequency modulation.
When low frequency signals added to high frequency signal then the envelope signal will follow which signal?
the low frequency signal which is nothing but the message signalNeither. The envelope will be that of the difference beat frequency. To get the envelope to follow the low frequency input signal you need to mix (multiply) the two signals, not add them.
Why you convert FM signal to IF frequency?
Mix it with a local oscillator whose frequency is (the IF frequency) away from the frequency of the FM signal you're interested in.
Why the linear combination of a low frequency intelligence signal and a high frequency carrier signal is not effective as a radio transmission?
to shift the frequency of information signal ,at the frequency domain to a higher frequency ...so the information can be transmitted to the receiver.
What is meant by zero phase frequency?
The zero phase frequency is the frequency at which the phase of the input signal and the output signal match.
Is The carrier frequency is usually lower than the modulating frequency?
when the frequency is low , energy will be obviously low. To increase the energy of the signal we need to increase the frequency. This is achieved by multiplying the message signal with the carrier signal (with high frequency).
What happens if we sample the signal at sampling frequency nearer to signal frequency?
If you sample at more than the Nyquist frequency (one half the signal frequency) you introduce an aliasing distortion, seen as sub harmonics.
