0
What else can I help you with?
How can you remove the hammer cover on a twinmaster pistol?
Pull the cover towards the rear sight and lift upwards.
How do you remove front bumper cover 1994 suzuki sidekick?
Feck off big hammer!
How do you remove the lens cover on 1993 Honda accord?
hammer Come on! Right or left=handed? Male or female? I REALLY need to know.
How do you look after a hammer?
put it in the cover
How do you remove the speaker cover from the door of a avalanche?
Usually a large channel lock plier will do the trick, if it still wont come loose, break out the hammer.
How do you Remove a trunk lock 1997 Ford Taurus?
Easy take of the black cover with a hammer, Break out the tail lamp assembly and cut out the lock
How do you remove a door panel on 1998 Oldsmobile Silhouette and replace the window motor?
take a flat bar or caw hammer slid under the door cover and pired out
Which silver pipe is the thermostat of a 1994 Nissan 300ZX located?
Its one that is in the middle of the timing belt cover, so under neath the upper part its located in a silver pipe that has a triangle joint. To replace it you would have to remove the fan cover, and the fan, and a couple of belts and u should go on from there to remove the 3 screws on the triangle like pipe and inside is ur thermostat
Where is the odometer fuse on a 2001 Harley Sportster?
Next to your battery you will see a triangle shaped cover with 3 screws in it, remove that to access wiring, fuses, etc.
How do you replace harley softail transmission cover locating roll pins?
Remove the old pins with Vise-Grips and drive the new pins in carefully with a brass hammer (to prevent distorting them).
How do you do level 20 in cover orange computer?
bounce it off the hammer and take the box and cover the orange
How do i you remove the magneto cover on a drz400?
Remove all exposed bolts holding the magneto cover on. However Suzuki decided to hide one behind the Starter cover. So you need to remove the 3 Phillips screws holding that on. I had to use a #3 driver, tap on it with a hammer to seat it then, with some strength, turn them out. You will see that last screw inside. Wiggle it out. Things will start to drop like small cylinders. remember where they go for reassembly. Remove the magneto and other electrical mounts and replace in new cover. It is fragile so be careful taking it out.
