0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the significance of specific speed?
Specific speed (Ns) is a non-dimensional design index used to classify pump impellers as to their type and proportions. It is defined as the speed in revolutions per minite at which a geometrically similar impeller would operate if it were of such a size as to deliver one gallon per minute against one foot of head. The formula used to determine specific speed is Where N = Speed of Pump in RPM Q = Capacity in gpm at the best efficiency point H = Head per stage in feet at the best efficiency point The specific speed determines the general shape or class of the impeller. As the specific speed increases, the ratio of the impeller outlet diameter, D2, to the inlet or eye diameter, Di, decreases. This ratio becomes 1.0 for a true axial flow impeller. Low specific speed - Radial flow Impeller. Medium specific speed - Mixed flow Impeller. High specific speed - Axial Flow Impeller.
What is 99 percent of 99?
99% of 99 = 99% * 99 = 0.99 * 99 = 98.01
What are the 99 times tables?
1*99=992*99=1983*99=2974*99=3965*99=4956*99=5947*99=6938*99=7929*99=89110*99=990...
Which is the smallest two digit no?
-99-99-99-99
What is the 99 times tables?
1 x 99 = 99 2 x 99 = 198 3 x 99 = 297 4 x 99 = 396 5 x 99 = 495 6 x 99 = 594 7 x 99 = 693 8 x 99 = 792 9 x 99 = 891 10 x 99 = 990 11 x 99 = 1089 12 x 99 = 1188
How do you replace impeller in 2006 mercury 60 hp bigfoot 4 stroke?
Annually
How do you change the impeller on a 9.8 mercury outboard?
The impeller on a 9.8 Mercury outboard boat motor can be easily changed. Remove the retaining bolt. The impeller will come off. Reverse the process to install the new impeller.
Mercury Marine where is the impeller located on a 7.5 hp motor?
The water pump impeller on a 7.5 hp Mercury outboard, is located on top of the gearcase, and is driven by the driveshaft.
How do you replace a sears leaf impeller?
you feel the clown
How do you I replace rear speakers in a 99 mercury villager?
You will need to remove the inner panels to gain access.
Where is the impeller on a 2.2hp mercury outboard?
right behind the prop, on the same shaft
Where is the heater valve located on a 99 Mercury Villager and how do you replace it?
On the firewall behind the intake. PITA to get to or even see for that matter
How do you change the impeller on a 25 hp mercury outboard?
What year? It may require special tools.
How do you change impeller on mercury 30 hp outboard?
undo t 5 bolts, remove lower unit, remove pump cover, slide old impeller off & replace with new one. Mske sure wesr plates & gaskets are good & replaced in correct order. put a little grease on top of unit & that's it.
Car stalling in a Mercury Cougar when slowing down?
If you have the 99 -02 Cougar replace the TPS (throttle positioning sensor) on the throttle body.
Replace keypad Mercury Marquis?
replace keypad Mercury Marquis?
How do you replace blower motor impeller on 2004 Ford Freestar?
you have to access the blower through the glove compartment. open the compartment and press the tabs on the sides in the back of the compartment. look inside and the bottom right and you will see the blower motor, remove the three screws and the wire harness, replace impeller and replace motor.
