Have vehicle scanned to determine the problem and then repaired
How to reset Navigation 2009 Acura TSX
anybody have any info on a 2009 ml320 how to reset service message?
To reset the maintenance light on a 2009 Acura MDX, start by turning the ignition to the "ON" position without starting the engine. Press the "Menu" button on the dashboard, navigate to "Vehicle Settings," and select "Maintenance Info." From there, choose "Reset" to clear the maintenance light. Turn off the ignition, and then start the vehicle to ensure the light is reset.
2009
You don't!
see:- http://grumunkin.blogspot.com/2009/08/how-to-reset-service-indicator-on.html :-)
To reset the service mileage on a 2009 Mercedes-Benz C180, turn the ignition to the “ON” position without starting the engine. Use the steering wheel buttons to navigate to the "Service" menu on the display. Select "Assyst Plus," then choose "Full Service" or "Service A/B," depending on what you need to reset. Confirm the reset when prompted, and your service mileage should be updated.
Go get it serviced.
To reset the radio code for a 2009 Acura MDX after disconnecting the battery, you will need to retrieve the radio code from your vehicle's manual or the card that came with it. If you can't find it, you can contact an Acura dealership with your Vehicle Identification Number (VIN) to obtain the code. Once you have the code, turn on the radio, enter the code using the preset buttons, and press 'Enter' to unlock it.
2009 models can be reset using the centre display panel going to "car-settings" and just scrolling down, it will not alter the long life service, for that you need a scanning tool.
To reset the Service C indicator on a 2009 Mercedes CLS550, turn the ignition to the "ON" position without starting the engine. Press the gas pedal all the way down three times within 10 seconds. After the third press, the service indicator should reset. Turn off the ignition and start the engine to confirm the reset was successful.
To reset the service indicator on a 2009 Ford Transit, turn the ignition key to the "On" position without starting the engine. Press the gas pedal three times within 10 seconds. After doing this, the service indicator should reset, and you can turn off the ignition. Restart the vehicle to ensure the indicator has been cleared.