0
What else can I help you with?
What is bigger 65 inches or 6 ft?
6 ft is 72 inches. That's more bigger than 65 inches.
What is 13 feet 5 inches minus 6 feet 2 inches?
7 ft 3 in. You can subtract 2 in from 5 in to get 3 in, then subtract 6 ft from 13 ft to get 7 ft and add the two results to get 7'3".
11 plus 6k equals 65?
11 + 6k = 65 Subtract 11 from both sides: 6k = 65-11 6k = 54 Divide by 6 to get k: k = 54/6 k = 9
How much is it to get Peugeot 106 taxed?
assuming its a 1100cc it will be about £120 pa or £65 for 6 months
How many sq ft in 6 x 20?
The answer depends on the units used for 6 x 20. It should be obvious to you that the answer for 6 inch x 20 inches will be very different to that for 6 yard x 20 yards, leave along 6 miles x 20 miles.,
What is 5 feet 4 inches minus 1 foot 6 inches?
1 ft = 12 in → 5 ft 4 in - 1 ft 6 in = (4 + 1) ft 4 in - 1 ft 6 in = 4 ft (12 + 4) in - 1 ft 6 in = 4ft 16 in - 1 ft 6 in = 3 ft 10 in Alternatively, convert to inches, subtract and convert back: 1 ft = 12 in → 5 ft 4 in - 1 ft 6 in = (5 x 12 + 4) in - (1 x 12 + 6) in = 64 in - 18 in = 46 in = (3 x 12 + 10) in = 3 ft 10 in
What are the specs to torque the head of a 1995 Cougar?
The 5.0 head bolt torque is step 1- 55 to 65 ft. lbs. Step 2- 65 to 72 ft. lbs. The 6 cylinder is the same as the 5.0
What is the width and length of the sphinx?
The Great Sphinx of Giza is 73.5 m (241 ft) long, 6 m (20 ft) wide, and 20 m (65 ft) high.
How many 24 inch tiles are needed to cover 10x12 patio?
A (24-in x 24-in) square tile covers (2-ft x 2-ft) = 4 square feet.The area of the patio is (10-ft x 12-ft) = 120 square feet.To cover 120 square feet, you need 120/4 = 30 tiles, laid out in 5 rows and 6 columns.
What is 120 divide by 6?
20
How do you measure 42 inches into yards?
you subtract the largest mult. of 12 from 42 which is 36 and that is 3 ft then that leaves 6 in. 3 ft eaquals one yard so 42in= 1yd and 6in
How many 6 x 6 inch square tiles to cover 65 square feet?
Area of one tile = 6" x 6" = 0.5 ft x 0.5 ft = 0.25 sq ft. Area to be covered = 65 sq ft Minimum number of tiles required = 65/0.25 = 260 tiles. This is the minimum number. In real life, the number may be larger if the area to be covered is not rectangular, or whose sides are not not an exact number of half-feet. It will then be necessary to cut tiles and that could result in breakages. Also, additional tiles may be required unless you are prepared to have a mosaic of all the offcuts.
