0
How do you wire a toggle switch to LED lights and your speakers so that the lights light up when the bass hits but you can turn em on and off?
Angel6132361323
You can't run the LEDs directly off the speakers, you need a special drive circuit to go between. Then you turn that drive circuit on and off.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What does a toggle switch do?
Toggle = back and forth, or on and off. A toggle switch toggles (turns) a light or other device on or off. Good example is a light switch (the wall kind)-- a toggle switch must also be of the "throw the stick back and forth" kind. Which a light switch basically is.
How do you wire your 87 samurai backup lights bypassing the backup light transmission mounted switch?
You would have to literally run a wire from the battery through a fuse and then to a toggle switch and then on to the backup lights, this will only function when the switch is on and will have nothing to do with the transmission being in reverse. This is essentially the same as putting a toggle switch across the transmission mounted switch (assuming the transmission switch is not shorted).
When a toggle switch will not turn off a light?
99% of the time it's the switch. has an internal short.
The cabin lights in 2001 Honda odyssey don't go off though the car is locked. How do you switch them off?
toggle the cabin light switch which is located next to the radio so that it is in the center (neutral) position, not up or down
Why does a light switch turn on your lights?
A light switch turns on lights because when flipped, it completes a complete circuit.
Can you straight wire your cooling fan to a light relay?
Just wire it to a toggle switch. When you need it, just flip the switch.
How do you switch off asc on a mini cooper?
In-between the window and lock switch in the toggle panel there will be a toggle switch that says ASC just hold it down for a second and the light on the speedometer should stay on. that means asc is off.
Your theft light keeps blinking while driving?
If your theft light keeps blinking while driving, chances are you have accidentally hit the toggle switch underneath the dash. Find the toggle switch that is located near the panel and click off the button.
You can't find the switch for the fog lights on your 2000 ford expedition Eddie Bauer and have no owners manual where is the switch?
The switch should be where your light are. You just pull out on the light switch but the fog lights will not come on unless all lights are on.
How do you wire up lights on a gas golf cart?
1. Unhook positive battery cable. 2. Find a spot and mount lights. 3. find a spot for a toggle switch on the dash. 4. run the wire coming off the back of the light to a toggle switch on the dash. 5. run another wire from an inline fuse to the other prong on the switch. 6. make sure the fuse is no further than a foot from the batter for best results. 7. Hook fused wire to possitive cable and connect back to battery. 8. test lights!!!
What is the difference between toggle switch and a push button?
A toggle switch is like a light switch. You flick (or 'toggle') the switch on or off and it stays in that position until you flick it again. You could compare a push button switch to a key on a keyboard. When you press a key momentarily it will display one letter on the screen. If you hold down the key, the same letter will repeat (e.g. aaaaaaaaaaaaaaa). Toggle switches can also look like push button switches. Most power buttons on a desktop computer tower is a toggle switch. The reset button on a computer tower is a push button switch.
Where are lights made?
In a light switch factory......
