0
What else can I help you with?
What do you use to couple 10 gauge wire together?
The electrical terminology for this device is a wire nut. If the two #10 wires are solid, twist the two stripped ends together with pliers and apply the nut to the wire ends. If the two # 10 wires are stranded lay the two stripped ends parallel to each other and apply the wire nut. Do not twist the stranded wires together.
How was the first telephone developed?
by putting two wire together
How do you tie barb wire together?
To tie two ends of barbed wire together, you can use a piece of baling wire or strong metal ties. Make sure the wires overlap each other before twisting the baling wire tightly around both strands to secure them together. Additionally, crimping sleeves can also be used to connect barbed wire strands effectively.
What is coaxials?
Co-axials means- 2 axis existing together. Two wires are conjoined together to form a coaxial wire...
What is definition of connecting wire?
The definition of connecting wire is a piece of wire used to attach two circuits or components together. The gauge or size of the wire must be large enough to support the amount of current flow.
How can I extend the length of an electrical wire using an electrical wire extender?
To extend the length of an electrical wire, you can use an electrical wire extender. This device allows you to connect two wires together securely, effectively increasing the overall length of the wire.
Can i wire two different size wires together?
To do so LEGALLY, the circuit breaker must not be rated at a capacity (in AMPS) greater than the SMALLEST wire.
How do you wire a receptacle from two switches one is 3 way one is single pole?
You cannot wire a single pole switch and 3 way switch together.
Can I wire two ballasts together and use one power cable Do both ballasts have to be earthed if they are connected?
Yes, the two ballasts can be supplied with one power source. The two ballasts will be paralleled together. This means supply black (hot) to black on ballast one and black on ballast number two. Tie all three under a single wire nut. Connect the neutral conductors all together under one wire nut. Both ballasts should be tied to the ground wire that is in the supply cable. All of these connections must be made in an approved junction box.
What does the term - wire splice - mean?
A wire splice is the joining of two or more wires together. Commonly this is done with an approved wire joining nut. All slices are to be made in junction boxes to prevent fire should the wire splice become unserviceable.
Where is the wire harness on a 1999 dodge Dakota v8 318?
Anywhere you see more than two wires twisted together, you have a wire harness. There are many on a 1999 Dakota.
How do I wire a new 3-way switch. I can't follow what my book says.?
you need the following wire should be 14-3 wire and two three way switches 14 -3 wire has 4wire in the bundle 1white 1black 1 copper and 1 of a different color this wire runs from switch to fixture to switch from power source tie copper wires together from source ( this is a ground )tie to fixture ground tie black wire together from source this should be the hot leg tie white wire together from source ( this is a Neutral) fourth wire runs from switch to switch wire nut together at fixture follow switch instructions all else fails call electrician
