error
The graduation of an angle would usually be expressed in degrees, of which there are 360 for a complete circle.
A rational number, other than an integer, is expressed as a fraction.
To check the precision of an instrument its apparent measurement must be compared to a known measurement. The difference between the measured quantity divided by the known quantity is expressed as a % precision of the instrument, or calibration. Most instruments when being calibrated are tested against multiple known quantities throughout the range of the instrument. Thus the precision of the instrument is determined throughout it's full range of measurement.
Add 273 to Celsius; for exact precision, add 273.15, but 273 is close enough for most all applications
Yes. It is usually the linear dimension in the horizontal direction. But it depends on the orientation of the triangle.
Yes, usually expressed in degrees.
The graduation of an angle would usually be expressed in degrees, of which there are 360 for a complete circle.
Math by tashana Mondestin
NOM on a blueprint indicates a nominal size or dimension and is usually expressed in common fractions. For example, a hole might be indicated as 1/4" NOM.
A nation's wealth is always changing and usually high, and not known to exact precision, so cents are not used in referring to wealth, only dollars.
point
true
It is expressed as a percentage (fraction of 100%).
Gold nuggets (Or anything that exists, for that matter) are in the third dimension. They have length, width, and height. For two dimensional objects, the area is expressed in square units, but because the gold nugget is in the third dimension, it's volume is expressed in cubic units.
Usually a length, denoted by L.
It is usually, but not necessarily, its longest dimension.
a dimension of 3 inches x 4 inches, usually a size of timber