NONE!
600 watts is nothing you don't need one, but if you insist, one 1 farad would fix you.
1 Watt= 1 J/s so600 Watt = 600 J/s
yes
Selectable 600 Watt, 900 Watt, or 1500 Watt
600
It depends on the rms of the two cvrs combined. Also if the 1200 watt amp is 1200 watt rated (rms) or 1200 watt peak. Lets say the two kickers have an rms of 600 watt each, and the amp is 1200 watt rms, which it probably isnt but i'll pretend. This set up would work because 600 of the amps watts would be correctly matched with one sub, and the other 600 would go to the other sub.
I have heard as a rule of thumb that you need 1 farad per 1000 watts, again that's just a rule of thumb and I'm no expert. Seems like overkill to power a 600W sub with that though, you might not need more than a 1 farad since the sub won't be able to handle much more than that
1 Watt= 1 J/s so600 Watt = 600 J/s
Ohm's law is a great tool to find the solution to your query. First, calculate how many watts your device is using, then it is 500,000 microfarads or one half farad per 600 watts. Good luck.
yes
They can be as loud, as the amp is not delivering 600 watts. The 10" sub rated at 600 watts is able to withstand more power.
Selectable 600 Watt, 900 Watt, or 1500 Watt
600
None.
Yes, but not to full effect.
It depends on the rms of the two cvrs combined. Also if the 1200 watt amp is 1200 watt rated (rms) or 1200 watt peak. Lets say the two kickers have an rms of 600 watt each, and the amp is 1200 watt rms, which it probably isnt but i'll pretend. This set up would work because 600 of the amps watts would be correctly matched with one sub, and the other 600 would go to the other sub.
nope your powering it just right
1 Watt= 1 J/s so600 Watt = 600 J/s