That depends on:
-- how full the drum is before the emptying begins
-- whether the contents of the drum are comprised of water, oil, or molasses
-- the temperature of the contents
-- whether the drum is emptied by a pump or by being tipped
-- if by being tipped, then the angle of tippage
-- the size of the egress port
-- whether a make-up air hole is also provided.
The question includes none of this information.
This depends on many factors.
You pour four gallons into the five gallon drum, and take the ten gallon drum with the other four gallons of oil in that.
9.2 days to empty the tank.
96 min. 12000/125 =96
That depends on 1 what the liquid was and 2 how much heat you are putting onto it.
How long does it take for an iv to empty
About 7 bushels
If completely empty it should.If completely empty it should.
How many bags of concrete does it take to fill upHey
A metal fifty-five gallon lube oil drum is thirty five inches tall. Given: Area of a circle = 1/4piDiameter2 and: 231in3 / gallon Take the square root of: 55 gal x 231in3 / gallon x 4 / 35in / pi I come up with about 21.5 inches for the diameter, which sounds about right. But of course individual drums vary a bit, so grab a tape measure if you have a drum handy.
9.29 days
2 hours