answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How long to run sprinkler hose to equal 1 inch rain?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many gallons of water in a 2.5 inch hose 100 feet long?

There need not be any water at all in the hose! The capacity of the hose is 3.41 cubic feet.


How long is an eighth of an inch?

If you can draw a line 1 inch long and divide it into 8 equal parts, then each of the segments would be an eighth of an inch long


How many gallons of water to fill a 2 inch fire hose?

A standard fire hose is 50 feet long. A hose this length with a 2-inch radius grants about 4.36 cubic feet. This volume holds 32 gallons of water.


How does low water pressure affect your home?

Takes a long time to fill a tub, for toilets to refill after flushing. Cannot spray water as far with a hose or sprinkler.


How long would it take to full a 12000 gallon pool?

approx. about 10-11 hours. On a above ground pool


How long is three eights of an inch?

One inch is equal to 2.54 centimetres. Three eighths of an inch is equal to 3/8 x 2.54 = 0.9525 centimetres.


How long would it take to fill a gallon jug with a one eighth of an inch hose?

It depends on the flow rate in the hose and that depends on the water pressure.


How long is 3 8ths of an inch?

1 inch is equal to 2.54 centimetres. Therefore, three eighths of an inch is equal to 3/8 x 2.54 = 0.9525 centimetres.


How long is a standard air compressor hose?

A standard air compressor hose is on average about 25 to 50 feet in length. These hoses are typically 1/4 of an inch in width but sometimes 1/2 inch too.


How many gallons of water is in a 2.5 inch fire hose fifty feet long?

12.5


How much water is in a 3 inch hose 25 feet long?

The capacity of a 25 ft hose with a diameter of 3 inches is 1.23 cubic feet. That is the maximum volume of water in the hose: there need not be any!


What is the average gallons per hour of water used in a residential sprinkler system?

"The average sprinkler will use in excess of 240 gallons of water per hour" also refer to http://www.libertylake.org/water_conservation.htm for watering guide. As a useful gauge: A garden hose with no nozzle attached, will spew out as much as 350 gallons per hour. So 240 sounds about right for a sprinkler system, keeping in mind that it will vary with your local water pressure and type of sprinkler system that you have. If your system has a damaged sprinkler head, you might as well be running that garden hose full blast. My sprinkler system uses 1,000 gallons in a three hour time cycle. I have six or seven zones. I suspect some of my heads are busted, since that sounds about like "garden hose figures." (333 gallons per hour)