0
What else can I help you with?
What is the definition for twist bit?
A standard fluted drill bit
How many digits are are in a standard us?
The answer will depend on a standard US WHAT! But since you have not bothered to share that crucial bit of information, I cannot provide a more useful answer.
How long is 7 kilometers?
That is a bit long. It is 7000 meters. It is a one and a half hour walk.
How long is 2.7 cm?
A bit more than 1 inch.
How long is 62 days in weeks?
A bit shorter than 9 weeks.
What is a twist bit?
A standard drill bit.
What is the standard size of a 6mm drill bit?
The standard size of a 6mm drill bit is 6 millimeters in diameter.
Is there any easy way to create a 10-bit unsigned integer in Csharp?
No. Use a standard 32-bit long integer, but only values between 0..1023.
What is the definition for twist bit?
A standard fluted drill bit
The CardBus technology uses -bit PCI for the interface standard?
32-bit
What drill bit can you use for exhaust manifolds?
A standard HSS bit will work.
What size standard drill bit should be used for a 6mm hole?
For a 6mm hole, a 6mm standard drill bit should be used.
How long should a golf driver shaft be if you are 5'11''?
Standard length will be perfect, standard length are usually 45.75" -46". But if you do feel the shaft is a bit short you could get half an inch or an inch added to it.
What type of expansion slot do and slower devices use?
The original IBM compatible parts used an 8-bit ISA slot. After that, they moved to a 16-bit ISA slot. There were other things like a VESA slot that didn't last for long. Then there were PCI slots (not express), and AGP was a faster video card slot standard. Then PCI-express replaced both PCI and AGP.
What is the ATA standard that changes the number of bits used to address data on a hard drive?
ATA/ATAPI-6 standard (aka ATA/100) allows for 48-bit addressing over the original 28-bits. This allowed for the breaking of the 137GB barrier limitation.
What sizes are typically included in standard drill bit sets?
Standard drill bit sets comes in inches unlike metric sets which come in meters. Standard sets usually starts with a 1/8" bit and go on up to larger sizes. Standard is the most common drill set used on jobs.
What is the bit-depth for VGA?
Standard VGA is 16bit.
