Assuming the length of 7 inches as the radius of a circle that the tip of the minute hand traces around a conventional clock, the tip's speed is one revolution per hour. One revolution, in this case, is a distance of 2*pi*radius (Circumference = 2*pi*r), which would be 14*pi. So the tip is traveling 14*pi inches per hour.
Since you want to know the time taken by the tip to travel a given distance (132 inches - make sure to keep your units consistent!), use the formula Distance = Rate*Tme. Solving for time gives Time = Distance/Rate. The total time is given by the total distance (132 inches) divided by the rate of travel, 14*pi inches per hour. This works out to 132/(14*pi) hrs, which in reduced terms is 66/(7*pi) hrs. In decimal form, this is approximately 3.0012 hrs, which is 3 hrs, 0 mins, 4.35 secs.
14ft, 7.8in.
360
The answer would be divide 3.14 by 6 and u would get ur answer.
A hand is an ancient measurement still used in measuring the height of horses. 1 hand = 4 inches 11 hands = 11 x 4 = 44 inches. As there are 12" in 1 foot then 44" = 3' 8" or 3⅔ feet.
It is the long hand.
The distance depends on how far the relevant point on the minute hand is from its point of rotation. This is because the motion of the minute hand is angular, not linear.
The hour hand is 2.7 metres (9 ft) long and the minute hand is 4.3 metres (14 ft) long.See the Related Link.
If both started at 12, in forty minutes, the minute hand would reach the 8 mark on the clock. The 8 mark symbolizes 8 hours past 12. So it would take 8 hours for the hour hand to travel as far as the minute hand travels in 40 minutes.
6 degrees.
14ft, 7.8in.
his hand is 104 inches
Minute Hand
1 hand is equal to 4 inches
In 60 minutes, the minute hand completely circumnavigates the face of the clock,and returns to where it was 60 minutes earlier. That's a travel of 360 degrees.
360
200 minutes = 31/3 hours, so the tip of the minute hand traverses 31/3 circumferiiduring that time.Circumference = 2 pi R .Total travel = 31/3 x 2 x pi x R = 20/3 x pi x 5.1 = 106.814 inches (rounded)
1 hand is 4 inches so 4 multiplied by 15 equals 60 inches. 60 inches is 5 feet tall.