ummm...4(?)
is this a trick question?
A watt is a measurement of electricity, usually pertaining to light. Light bulbs luminosity is graded by wattage, such as a 60 watt bulb, 100 watt bulb and so on. You would find a watt in a light bulb, to start.
Original answer: Because it gives off more power. Updated answer: In general, because the 100-watt bulb produces more total light (lumens) because it also consumes more power than the 60-watt bulb. However, a 60-watt can produce more lumens than a 100-watt bulb, depending on the types of bulbs in question.
Incandescent bulbs give about 10 lumens of light per watt of electric power Halogens give about 13 lumens per watt CFLs give about 50 lumens per watt So it depends on the type of bulb.
If both bulbs fit into the same socket I would presume this to be fine.
Light bulbs connected in parallel automatically have "the same voltage applied to them".
current consumtion of a bulb
As of 4-12-14 there is a 23 Watt screw in bulb supposedly equal to 100 Watt. It is likely there are higher watt bulbs in the flourescent screw in type available today.
3 bulb can be connected..............................
It is probably a 60 watt bulb (believe it or not). Bulbs are rated in watts. A 100 watt bulb is brighter and consumes more power than a 60 watt bulb
A watt is a measurement of electricity, usually pertaining to light. Light bulbs luminosity is graded by wattage, such as a 60 watt bulb, 100 watt bulb and so on. You would find a watt in a light bulb, to start.
A single bulb is better if you can get it, it's simpler to use, but 23 watt bulbs are easier to find. Five 23 w bulbs totals 115 watts so they would be a little brighter.
A 15-watt fluorescent should produce about as much light as a 75-watt incandescent.
It isn't more, it is less if bulbs are of the same type.
Yes, it will be perfectly safe.
Original answer: Because it gives off more power. Updated answer: In general, because the 100-watt bulb produces more total light (lumens) because it also consumes more power than the 60-watt bulb. However, a 60-watt can produce more lumens than a 100-watt bulb, depending on the types of bulbs in question.
Incandescent bulbs give about 10 lumens of light per watt of electric power Halogens give about 13 lumens per watt CFLs give about 50 lumens per watt So it depends on the type of bulb.
No, the highest wattage bulb will have the lowest resistance.