Best Answer

41,000 of them.

Q: How many 400mm long x 200mm high x 200mm deep blocks can cover 3280 square meters?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

0.4m2

1125

.4 meters=400 mm

4

well 400 millimeters= 0.4 meters if that's what your asking. so 0.4 meters

Related questions

0.4m2

A cubic metre is a unit of volume. A square metre is a unit of area. The two units are therefore incompatible.

1125

400 millimeters is 0.4 meters.

.4 meters=400 mm

Flat Display Mounting Interface (FDMI) is a standard for mounting flat panel monitors and TVs. This is correctly known as FDMI, but more often referred to as "VESA mount". The interface is implemented on most modern flat-panel monitors and TVs, but not all.Sub-Standards * MIS-D 75 = Mounting holes are in a 75mm x 75mm pattern. * MIS-D 100 = Mounting holes are in a 100mm x 100mm pattern. * MIS-E = Mounting holes are in a 200mm x 100mm pattern. * MIS-F = Multiple holes are spaced so that mounting points may be at: ** 200mm x 200mm ** 400mm x 400mm ** 600mm x 200mm ** 600mm x 400mm ** 800mm x 400mm

600mm * 400mm = 0.6m * 0.4m = 0.24 sq metres

4

well 400 millimeters= 0.4 meters if that's what your asking. so 0.4 meters

The number of concrete blocks in a metre will depend on the type of concrete block being used.Concrete blocks come in different sizes in different countries and each has variations in width, height and thickness based on the standard module size, such as 1/2 or 3/4 variants of each dimension.Note that each block has an actual size and a nominalsize that accounts for a typical mortar joint. Usually the nominal size is a round number giving easier calculations and construction dimensions. (The nominal depth is not usually the depth of the individual wall, as there is no mortar layer needed.)The standard modules for some countries are:UKBlock dimensions 440mm Long × 215mm High × 190mm Deep (~17 1/3" L × 8 7/15" H × 7 1/2" D)Nominal dimensions 450mm Long x 225mm High x 200mm Deep (~17 5/7" L × 8 6/7" H × 7 7/8" D)Number per lineal metre: 2.22Number per square metre: 9.88Also available as a standard module:Block dimensions: 390mm Long x 190mm High x 190mm DeepNominal dimensions: 400mm Long x 200mm High x 200mm DeepNumber per lineal metre: 2.5Number per square metre: 12.5USABlock dimensions: 390mm Long × 190mm High × 190mm Deep(~15 5/8" L × 7 5/8" H × 7 5/8" D)Nominal dimensions: 400mm Long x 200mm High x 200mm Deep (~16"L × 8"H × 8"D)Number per lineal metre: 2.5Number per square metre: 12.5Australia and New ZealandBlock dimensions: 390mm Long x 190mm High x 190mm DeepNominal dimensions: 400mm Long x 200mm High x 200mm DeepNumber per lineal metre: 2.5Number per square metre: 12.5

250 mm x 400mm

It depends on what you want to photograph, assuming you need this and not just "view" (that's what binoculars are for). I suggest a 200mm telephoto as a minimum, ideally 400mm. As price increases considerably, you can use an adaptor to increase focal length. A 2x adaptor will provide 400mm instead of 200mm, but you will lose on quality. Also, considering the distance, you will need a tripod to shoot steadily at such a distance. Some telephotos will have stabilization (VR, IS etc depending on manufacturer) but best results will be provided using a tripod.