it is 72000000mm3
A2. 0.8 x 0.6 x 0.4 = 0.1920 cubic metres.
0.4m2
41,000 of them.
1125
600mm * 400mm = 0.6m * 0.4m = 0.24 sq metres
it is 72000000mm3
A2. 0.8 x 0.6 x 0.4 = 0.1920 cubic metres.
600mm x 180mm = 108000mm2 (108000 square millimetres)
600mm x 600mm is 0.36m2.
To calculate the area of a rectangle, you multiply the length by the width. In this case, 900mm x 600mm equals 540,000 square millimeters. To convert this to a more common unit of measurement, you can divide by 1,000,000 to get 0.54 square meters. So, 900mm x 600mm is equivalent to 0.54 square meters.
0.4m2
Flat Display Mounting Interface (FDMI) is a standard for mounting flat panel monitors and TVs. This is correctly known as FDMI, but more often referred to as "VESA mount". The interface is implemented on most modern flat-panel monitors and TVs, but not all.Sub-Standards * MIS-D 75 = Mounting holes are in a 75mm x 75mm pattern. * MIS-D 100 = Mounting holes are in a 100mm x 100mm pattern. * MIS-E = Mounting holes are in a 200mm x 100mm pattern. * MIS-F = Multiple holes are spaced so that mounting points may be at: ** 200mm x 200mm ** 400mm x 400mm ** 600mm x 200mm ** 600mm x 400mm ** 800mm x 400mm
A 600mm x 600mm x 50mm concrete slab would weigh approximately 108 kg or 238 lbs, assuming a density of concrete around 2,400 kg/m^3 or 150 lbs/ft^3.
1m = 1000mm => 0.4m = 0.4 x 1000mm = 400mm ;)0.4 m = ? mm
600 mm = 60 cm and there are about 30 cm in 1 foot and so 2*2 is about 4 square feet
The weight of the steel plate can be calculated using the formula: Volume = Area x Thickness. First, calculate the area of the plate (400mm x 400mm = 160,000 sq mm). Then convert it to sq meters (160,000 / 1,000,000 = 0.16 sq m). Finally, using the density of steel (7850 kg/cubic meter), calculate the weight (0.16 sq m x 0.01 m x 7850 kg/cubic m). The total weight is approximately 12.56 kg.