0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many amps for a 0.75mm cable?
5 amps
How many amps are in 40 volt amps?
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
500kva how many amps given capacity?
500 KVA how many amps? almost 650 Amps according to formula.
How many kA in 106 Amps?
.106 kA = 106 amps.
How many amps will 200ft of 6ga wire carry?
50 amps.
How many amps for a 0.75mm cable?
5 amps
How many amps is 6mm cable rated at?
6mm2 cable is rated at 40amps
How many legal amps can a 35mm cable conduct?
44.8AMPS
How many amps can a number six wire hold?
55 amps on copper wire.
How many amps is 10-2 romex safe for?
A #10 copper wire in a NMD90 cable is rated at 30 amps.
How many amps can a 6 gauge wire hold?
101 amps for chassis wiring and 37 amps for power transmission. This is for short lengths of wire.
How many amps taken 1 sq-mm copper cable?
That depends on what temperature-rise you'll accept, and on what type of coating or jacketing surrounds the cable, and on the airflow around the cable.
How many people can a cable car hold?
It varies depending on the size and type of cable car. Typically, a standard cable car can hold between 20 to 30 passengers.
How many amps service does 12 gauge yellow wire hold?
The normal current capacity of 12 AWG copper wire is 20 amps.
How many amps does a 12volt 2hp motor draw?
124.3 amps. If you have one on a vehicle, for example a winch, use no less tha 00g cable. That is a LOT of power, and an ordinary alternator can't handle that.
How many amps will a number 2 copper wire hold?
Copper wires do not hold amps, they have a cross sectional area capacity to allow amperage to flow. In the electrical trade this is spoken of as "ampacity" of the wire. It is a combining of the two words amps and capacity. A # 2 copper wire with an insulation factor of 60, 75 or 90 degrees C is consecutively rated at 100, 115 and 120 amps.
How many houses can a 30 kilowatts power?
A kw, or Killowatt = 8.7 amps. So, 30 x 8.7 = approximately 260 amps. A wall Air conditioner draws about 12-15 amps. A refrigerator about 10-12 amps, a 100 watt light bulb .87 amps or less than 1 amp. Houses typically have either a 100 amp main breaker or, 150 and up. In the old days, 60 amps was common. Your answer is, as many houses as it takes to use 260 amps. If it's for a generator, as backup, 4-8 houses to keep the required things working. BUT use a large cable to run the power. 260 amp cable is about 3 ought size. Good luck.
