0
What else can I help you with?
How many amps is 10 killowatts using 220volts?
10000 divided by 220 for a resistive load.
How many AMPs is 18000btu at 220volts?
A btu is a measure of energy, but 18,000 btu per hour is a power of 5.22 kW, which is 5220/220 amps, 24 amps.
How many Amps in 3KV?
There are zero amps in 3000 volts. A load needs to be connected to the voltage.
How many amps in 3 AA batterys?
3 AA batteries provide about 4.5 volts. The amps depend on the load but for D-cells a load of 10 amps can be sustained for short periods.
Why is my single phase induction motor drawing to many amps?
I have a single phase induction motor. It draws 8 amps on start up and climbs to 14-15 amps when I put a load on it. When I don't have a load it runs at 1 and climbs to 2-3 amps. It is normal operation for this motor to run at the lower number of amps with a load. But I don't know what is wrong.
How many amps does 3kW geyser draw?
Assuming no other factors are considered, a 3kW geyser would draw approximately 13 amps of current on a standard 230V electrical supply. This calculation is based on the formula: Power (in watts) = Voltage (in volts) x Current (in amps).
How many amps into 240volt?
There are zero amp into or in 240 volts. These are two different entities. A load needs to be connected to the 240 volt supply and then the amps will flow in relationship to the resistance of the load.
How many amps would a 24 watt led light use per hour?
"Amps" is a steady thing. There's no such thing as "Amps per hour".The current through a 24-watt load is[ 24/the voltage across the load ] Amperes.
How many amps will a 750kva 3phase bank carry on 277 480 volts?
If the total bank is 750kVA, full load amps is 902A.
How many amp do you need to run a house?
Minimal 100. Depends on load draw of home. Can be 200 amps or 400 amps as well.
How many amps can be put on a 125 amp service?
You should not load a 125 amp panel any more than 100 amps.
How many watt in 5 amp switch normally use in home?
The switch will use no wattage whatsoever. The load on that switch is what uses power. If you know the load is 5 amps then 5 amps at 120 volts is 600 watts.
