The heater should have a wattage rating (very few list amps). Calculate the amps using the wattage and voltage. Amps = Watts/Volts(480).
yes and and no but you need to know how many amps the heater uses and how many amps the relay can with stand..
First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr
To answer this question the voltage of the immersion heater is needed. I = W/E.
8 AWG.
You need to get a specified bathroom heater for it to be considered safe.
5 amps
There are zero amps in 1000 watts. Watts are the product of amps x volts or I = W/E, watts divided by voltage. As you can see, that if no voltage is stated no amperage can be given. Once you find the voltage of the heater then use the following equation, Amps = Watts/Volts to find the current draw of the 1000 watt heater.
It doesn't need electricity
7 pocket amps
To charge a car battery you need aproximatly 8000 amps To charge a car battery you need aproximatly 8000 amps
In order to find the correct size space heater, first you need to find the AREA of the room, which is 10 x 12 = 120 square feet. Then you multiply this by 3.41 BTU's = 4092 BTU's. A STANDARD SPACE HEATER will be appropriate (a standard space heater is appropriate for up to 5100 BTUs or 1500 watts). If there are a lot of windows or the ceilings are higher than normal (normal is from 8 ft to 10 ft tall ceilings), than you may need a larger space heater, but in this case, a standard sized space heater will do.
you will need 21.81 amps at 220v