0
There is one part of the question missing. To find an answer the kW of the heater must be stated. Then the equations used are, to change kW to watts, Kw/1000 = watts. Once that is found then use, I = W/E, Amps = Watts/Volts. This will give you the value in amperage of the heater.
Wiki User
∙ 8y ago
Wiki User
∙ 12y agoThe formula you are looking for is I = W/E. Amps = Watts/ voltage. Amps = 1000/240 = 4.1 amps. The wire for this circuit is a #14 wire.
Add your answer:
Earn +20 pts
How di you convert kw to amps for a one phase system?
A kw (kilowatt) is 1000 amps x volts. If you assume your one phase system has 120 volts, then divide by 120. Cheap, but close enough for most work, assume 100 volts, then each amp is a tenth of a kilowatt.
What will be the full load current of single phase 5Kva ups?
Assuming single phase voltage 220 Volts AC, the maximum current would be approximately 25 amps.
How many amps in 17000 watts?
At 240v single phase it's 70.8 amps. If it runs on 2 wires plus ground, take the voltage rating of the equipment and divide that into the watts to get amps. At 480v 3 phase it's 25.8 amps. At 208v 3 phase it's 47.2 amps. <<>> There are zero amps in 14 kW. A voltage needs to be stated. I = W/E, Amps = Watts/Volts.
What is kilowatt hour use of roof deicers?
A kilowatt hour is the use of 1000 watts of power in 1 hour. The deicers should have a rating of a voltage such as 110 volts or 220 volts and a current of "X" amps. Multiply the voltage (in volts) times the current (in amps) and you will then know how much "power" in watts the deicer uses. My guess is you will see numbers such as 120 volts at 5 amps. Therefore 120 x 5 = 600 watts per hour or .6 kilowatts per hour.
How many output amps is a 45 kva transformer?
There is not enough information provided to answer. KVA is short for "Kilo Volt Amperes". That is, thousands of Volt Amps. In order to determine how many Amperes are flowing, you must know at what voltage it is operating. Amperes = 45,000 ÷ volts Bill Slugg
How di you convert kw to amps for a one phase system?
A kw (kilowatt) is 1000 amps x volts. If you assume your one phase system has 120 volts, then divide by 120. Cheap, but close enough for most work, assume 100 volts, then each amp is a tenth of a kilowatt.
18 ampers 3 phase 415 volts how much kilowatt?
Volts x Amps = Watts, divide with 1000 and you get kilowatts.
How many amps does a 2000 watt heater draw at 240 volts on each line?
For a single phase circuit, the equation you are looking for is I = W/E. Amps = Watts/Volts.
What is max single phase hp as per nec?
The maximum single phase HP motor listed in the CEC is 10 HP. At 115 volts 100 amps and 230 volts 50 amps.
How many amps will a 500kw using 240 volts produce?
500,000 watts/240 volts = 2,083.34 Amps (single phase)
What amperage will a range with a rating of 12.9 kw draw?
This depends on what voltage the range is rated for and if it is single phase or three phase. At 220 volts single phase it is about 60 amps, 240 v single phase , 53 amps and at 480 v three phase about 15 amps.
How many amps will give you a kW?
Amps can not give you a kilowatt with out a voltage being applied to the question. Watts = Amps x Volts. Amps = 1000/ Volts.
How can you convert kw to amps?
watts = volts x amps kilowatt = 1000 watts
How many amps from a kilowatt of solar power?
watts are equal to amps times volts.
What would be the amperage draw of a single phase 1200 watt heater if voltage is 120?
10 Amps. Amps=Watts/Volts
How many amps is 6kW 240 volt single phase?
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
What is the primary amps on a 25kva tranformer with input volts 480 Volts AC?
if it's single-phase, 25,000 divided by 480.
