500,000 watts/240 volts = 2,083.34 Amps (single phase)
When you multiply amps x volts the product is watts. Using this formula W = Amps x Volts should give you your answer.
To calculate the amps, you can use the formula: Amps = Watts / Volts. So, for 2000 watts and 110 volts, 2000 watts / 110 volts equals approximately 18.18 amps.
When they give you WATTS the also give you VOLTS. Using some very simple math you can then figure out AMPS. WATTS = Amps x Volts
The unit of power is expressed in watts, and the product of current (Amps) and voltage (volts) is power there fore if you multiply the amps and the volts give watts. so 20 x 240 will give you a 4800 watts of power.
Watts = Amps x Volts. Amps = Watts/Volts. 10000/120 = 83.3 amps can be used at 120 volts. On a generator that large it is most likely that it also has the capacity to produce 240 volts. 10000/240 = 41.6 amps can be used at 240 volts. What you can connect to the generator will be totals of the amperage of devices that do not go above these amp ratings.
6 amps.
If your generator is rated at 1000 watts continuous......and you are using 120V.....available amps are 1000/120 =8.3 .
When you multiply amps x volts the product is watts. Using this formula W = Amps x Volts should give you your answer.
36.6 amps maximum at 120 volts, but should not be loaded to over 29 amps. At 240 volts it will produce a maximum of 18.3 amps but never loaded to any more than 14.6 amps.
This will still only produce 12 volts. It will produce 1200 watts. watts is the result of Volts times Amps.
No
To calculate the amps, you can use the formula: Amps = Watts / Volts. So, for 2000 watts and 110 volts, 2000 watts / 110 volts equals approximately 18.18 amps.
Using Ohms law, the resistance can be calculated by using the following formulas. R = Watts/Amps (squared). R = Volts (squared)/Watts. R = Volts/Amps.
Ohms can be found by using these formulas. Ohms = Volts/Amps, Ohms = (Volts (squared))/Watts, Ohms = Watts/(Amps (squared)).
When they give you WATTS the also give you VOLTS. Using some very simple math you can then figure out AMPS. WATTS = Amps x Volts
The unit of power is expressed in watts, and the product of current (Amps) and voltage (volts) is power there fore if you multiply the amps and the volts give watts. so 20 x 240 will give you a 4800 watts of power.
Watts = Amps x Volts. Amps = Watts/Volts. 10000/120 = 83.3 amps can be used at 120 volts. On a generator that large it is most likely that it also has the capacity to produce 240 volts. 10000/240 = 41.6 amps can be used at 240 volts. What you can connect to the generator will be totals of the amperage of devices that do not go above these amp ratings.