0
Amps vary depending on mode of use. Usually 19 Volt batteries usually have a 2 ampere hour capacity. If you fully charged the battery and connected it to drill and started a timer when you turned it on at full power; you could measure the time to fully discharge. If it ran for 1 hour you would be pulling two amps. On the other hand if you shorted out the battery it would draw many more amps and die quite quickly.
Wiki User
∙ 12y ago
Wiki User
∙ 11y agoHow many amps do you WANT to be available in your 19.2 volts.
Unfortunately, the question as asked cannot be answered.
Volts is a measure of electrical potential, sort of like having a tank of water suspended and measuring the pressure at the bottom of a long tube. The pressure goes up as the tank is raised higher.
But the rate of water coming out of the tube (might be compared to watts) is a function of both pressure and the size of the tube.
The formula
Watts = Volts * Amps
should give you an idea of how the three measurements interrelate. You must know two to be able to calculate the third.
Add your answer:
Earn +20 pts
How many amps does 500 watt halogen pull?
At 120 volts it will pull 4.166 amps. At 240 volts it will pull 2.08 amps.
How many amps drawn a 110KW motor?
Watts = Volts times Amps. Therefore, if the voltage was 220 volts, the motor would draw 500 amps. If the voltage was 4,000 volts, the motor would draw 27.5 amps. The voltages for large powerful motors tend to be relatively high, for example in the 380 Volts to 11,500 Volts range.
How many Amps in 3KV?
There are zero amps in 3000 volts. A load needs to be connected to the voltage.
How many amps will a 4300 watt generator produce?
36.6 amps maximum at 120 volts, but should not be loaded to over 29 amps. At 240 volts it will produce a maximum of 18.3 amps but never loaded to any more than 14.6 amps.
380volt 266KW how many amps?
volts = watts divided by amps amps = watts divided by volts watts = amps times volts so 266,000 watts divided by 380 volts = 700 amps and I might also point out that whatever it is you are talking about is very dangerous and can kill you in less than a heartbeat. I'd be sure to talk with an electrician if I were you if you plan on going anywhere near that.
How many amps at 12 volts equals 16 amps at 120 volts?
160 amps at 12v.
How many amps at 120 volts equals 16 amps at 12 volts?
160 amps at 12v.
How many amps DC is 12 volts 1.5 amps at 5 volts?
You have your own answer. It is 1.5 amps.
If voltage is 12 volts and ohms is 0.5 how many amps in circuit?
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
4 volts is a many watts?
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
How many amps with 70 watts 13.8 Volts dc?
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
How many volts it takes to cause a current of 1.95 amps to exist in a 200 watt lamp?
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
If 13.6 volts is how many amperge?
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
How many amps are in ohms?
It's not that simple. The basic formula is Volts / Ohms = Amps. For 30 Volts you'd get 0.5 Amps, for 60 Volts you'd get 1 Amp, for 120 Volts you'd get 2 Amps.
How many volts in a watt?
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
How many watt in amp?
It's watts divided by volts equals amps. Example: 1200 watts at 120 volts is 10 amps. To get the watts if you know the amps, multiply the amps times the volts. 10 amps at 120 volts is 1200 watts.
How many amps at 220 volts can be drawn from 10kw?
The formula you are looking for is I = W/E. Amps = Watts/Volts.
