0
How many barrels of cement slurry are required to fill a 15 inch diameter well thats 1800 feet deep?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many gallons of Cattle slurry to the ton?
One ton of cattle slurry is equal to 220 gallons. Cattle slurry contains nitrogen, potash, and phosphate and is good for plant growth.
How do you clean a tarnished nonvaluable dime that is penny colored so you don't keep thinking its a penny?
Are you sure it is tarnished and not an off-metal strike? Should be able to tell by weight. And if it's not valuable, spend it and let someone else worry about it. == Brasso or another metal polish will do the trick. You could also just use some fine steel wool and do it "dry" or make a slurry of scouring powder and a bit of water to form that slurry or a paste. Look the coin over first before taking it to the cleaners to be sure it's a "regular" coin and not a "valuable" one.
How much water is in 7000ft of 20 inch pipe?
The volume of a cylinder is (pi) x (radius)2 x (length)Radius of this pipe = 10 inchesLength of this pipe = 7,000 ft = 84,000 inchesVolume = (pi) x (10)2 x (84,000) =26,389,378.3 cubic inches =15,271.6 cubic feet =114,239.7 gallonsThat's the volume of the pipe. I have no way to know how much water may be in it.It could be empty, half full of water, 2/3 full of mice, coal slurry, crude oil, soybeans, etc.
How many quarters will fill a 50 gallon barrel?
A quarter is 808.5 mm3. If you melted the quarters into a slurry, and poured that into the barrel, you could fit 208 million/808.5 = 257,000 quarters into a 55 gallon drum. If you want to preserve them whole, this becomes a stacking problem. There will be spaces between the quarters, and we would have to estimate how much space is wasted. Just drawing packed circles on a piece of paper I'd guess perhaps 10% of the volume would be air, so deducting 25,000 quarters from our solid mass gives a ballpark estimate of 225,000 quarters.
How many barrels of cement slurry are required to fill a 17 inch diameter well that is 1500 feet deep?
3467
What is cement grouting?
cement grouting is the process of injecting the cement slurry in to the engineering structures to stabilize the structure.
How can cement slurry modefy to enhance its function in oil well cementing operation?
How can cement slurry modefy to enhance its function in oil well cementing operation?
What is slurry cement?
mixture of water-cement-fine sand in a certain ratio which is usable to fill gaps, voids and other repairing purpose
What is the weight of cement mortar?
unit weight of cement, Portland is 1506 kg/cu.m unit weight of cement, mortar is 2162 kg/cu.m cement, slurry is 1442 kg/cu.m
How do you make a sand slurry mix?
two sacks of cement per cubic yard of sand
Can you tile over painted concrete wall for shower?
you have to remove paint n rough the surface then put some cement slurry n paste the tile by cement
How much does cement slurry cost per yard?
As of June 2014, the price for cement slurry is around $180 per yard. This includes delivery. Most places offer a quantity discount. For instance, the current price if you order 6 or more yards is around $88 per yard.
What are the factors affecting the initial setting time of cement?
When cement is mixed with water, it forms slurry which gradually becomes less plastic with the passage of time & finally a hard mass is obtained. In this process, at a certain stage when the cement paste is sufficiently rigid to withstand a definite amount of Pressure, it is said to have set & the time required to reach this stage is termed as "setting time".
Where can one learn how to install ceramic tile?
If you are installing on a concrete slab, then make a sand bed with sand & cement mixed to a praportion of 1:25. Level the bed. Then make cement slurry by mixing water. Pour the slurry on the bed for about an area slightly bigger than tile. Place the water soaked tile & give light blows by a wooden piece. then repeat the same procedure for next tile. Next day clean the joints & remove all excess cement slurry which has come out. Rake the joints. Then fill the joints by slurry of white cement. After a drying period of 2 hours, remove the excess white cement slurry. Pour some water for three days to keep the joints wet. If you want to install on prelaid flooring tile, then first grind the existing tile surface to make it rough. Then make cement slurry with polymer additive. Then paste the tiles on this rough surface by applying 3 to 4mm of layer of slurry. Sanjay - nikiasso@yahoo.com
Difference between gas concrete and foam concrete?
Gas concrete is also known as aerated concrete. It is generally made by introducing air or gas in to slurry composed of portland cement or lime and finely crushed silicious filters.Foam Concrete. A stabe foam is mixed with cement and crushed sand slurry thus causing the cellular structures when it gets set and hardened.
Formation of ordinary Portland cement?
Ordinary Portland cement is form from materials of limestone or chalk and clay in proportion of 78and 22% respectively. The limestone and the clay are crushed and water is added to form slurry. The slurry is the heated at a high temperature in a klin to form clinker. The clinker is grinded into a powder and a range of gypsum is added which generate setting or hardening when water is added.
