0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many bits of data are there in one-second video at a bit rate of 1 kbps?
1024 bits
How many characters are there in a encyclopedia how long would it take to transmit the text over a t-1 line at 1.544 mbps and fiber optic line at 2.488 gbps?
I don't know how many characters there are in a set of encyclopedias, so let'smake one up:Let's say the set of books has 10,000 pages (average of about 385 pages for eachletter of the alphabet), and each page has an average of 2,000 characters printedon it.We won't worry about pictures, weird fonts, or symbols right now. Just 10,000 pages,with 2,000 characters on each page. That's 20 million characters all together.-- It takes 8 bits to transmit one ASCII character.-- So we'll need to transmit 160 million bits.-- At 1.544 Mbps, 160 million bits takes 103.63 seconds = 1minute 43.6seconds.-- At 2.488 Gbps, 160 million bits takes 0.0643 of one second.
How many bits are required to sample an incoming signal 4000 times per second using 64 different amplitude levels?
You will need many discrete bits. The number goes up because of the high number of amplitude levels.
How many bits are in a dollar?
eight bits are in a dollar
How many bits will it take to store a 7-digit telephone number in BCD?
28-bits
What is the definition of baud width?
Baud Width is an outdated Internet term. It refers to how many bits in a baud a modem can send per second. A baud is actually a pulse and carries a certain amount of bits per pulse. Nowadays its much simpler to refer to bits per second (BPS) since this is what Internet users wish to know; verses how many bits in a baud [pulse], and how many of these bauds are put out in a second.
How many minutes would take to transmit 512512 image with 256 gray levels at 300 baud?
512x512x1 (256 = 2^8 = 1byte) * 8 (convert to bits) / 300 bits per second = 6990.50(6) seconds.
Suppose you want to send 1000 seven-bit characters of data How many total bits will you transmit using asynchronous transmission How many bits total will you transmit using synchronous transmissio?
I have this same question and don't know it, please answer.
How many bits are in 1000Mbps?
It has been offered that: "8000000000 bits are there in 1000Mbps." However, this is not correct. Each M is 1,000,000 bits, so 1,000 M is 1,000 x 1,000,000 or 1,000,000,000 bits per second. Be careful if talking about MBytes of memory, which is 8 times as many bits. Thus, to transmit 1MB of memory at 1 Mbps would take at least 8 seconds (not including protocol overhead and errors requiring retransmission).
How many words can 8 bits and 16 bits processors transmit at a time?
An 8 bit processor can transmit one letter at a time. In the ASCII code, each of the first 127 combinations of bits has a special standard meaning. The last 127 is given a special meaning. So an an 8 bit processor can transmit 256 bits at a time. An A is 65 bits. A 16 bit processor can transmit two letters at a time. A B is 66 bits. An E is 69 bits. It can transmit a B and an E. By definition that is considered a word. A difference exists between the way computer people use the language and normal people use it. Actually, a piece of equipment called a bus attached to the processor does the actual transmitting.
How many bits per second is 2 MB?
2 MB per second equals 16,777,215.9 bits per second.
How many bits does a serial port transmit at a time?
Serial ports transmit data one bit at a time, which is why they are becoming obsolete.
How many bits does a 1 frame per second have?
In order to know how many bits/second there are in 1 frame/second, you need to know how many bits are in that frame. In a typical asychronous serial protocol with 8 bits per frame, the bit rate would be 0.125 bits/second. If you are talking the IP network layer of TCP/IP, then the frame size is very dependent on the underlying message payload and headers.The original question, by the way, is invalid. Its asks "how many bits does...", but it should have asked "how manys bits per second does...".
When they were originally introduced many years ago dial-up modems were capable of data transfer speeds of merely 15 to 30 bits per second?
The earliest modem I owned was 300 baud, but I remember earlier ones at 110 baud -- call it 110 bits per second. Divide by 8 to get about 14 bytes per second, which is roughly 14 characters per second, which is faster than most people can type.
How many bits of data are there in one-second video at a bit rate of 1 kbps?
1024 bits
How many bits of information does the human brain take in per second?
The human brain on average takes in 11 million bits of information per second. However the brain is only aware of just 40 of those bits of information per second.
How many Kilobytes per second is 100.0 Mega bits per second?
100 megabits per second (Mbps) = 12800 kilobytes per second (KBps)
