0
How many brick would it take to under pin a trailer 28 ft wide by 60 ft long?
Wiki User
∙ 12y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the area of a trailer with 53 ft long and 6 ft wide?
3182
One brick is 8.5 inches long a wall will be 34 feet long How many bricks are needed for each row?
multiply your total linear feet by 12 inches (1 foot), divide that number by the length of the brick and there is your answer.
How long would it take to fall 100000 feet?
Just under 5 minutes.
How many cubes are there in a semi-trailer that is 98inches wide by108 inches high by 53 feet long?
3676
How many bricks do you need to build a brick wall 10ft long 10ft high?
It depends on the size of the bricks and their orientation.
How many bricks in a yellow brick road?
How many bricks there would be in a yellow brick road would depend on how long the road was. A standard brick is 3 5/8" x 2 1/4" x 8".
What size truck to you need to hall a D3 dozer?
Ideally, a Class 8 tractor and lowboy trailer would be ideal, but you could tow it with a one ton pickup and goose neck trailer, so long as the total weight of the combination was under 26,000 lbs.
What are the dimensions for 53' trailer?
Normally, the overall height would be 13'6", the trailer would be 53' long, the inside height inside the box would be 110". Kingpin settings vary by manufacturer
Does the word 'brick' have a long you sound?
No, the word 'brick' does not have a long "you" sound. It is pronounced with a short "i" sound, as in "kick" or "stick."
What would be the mass of a gold brick that is 30cm long 8cm wide and 4cm tall?
2.56
Utility trailer that is 5' X 8' ft The axle is 59 inches from the front of the trailer not the coupler You want to extend the back of the trailer 10 inches Would this be safe to do and pull a load?
On a 5' X 8' Utility Trailer you would want a 60% / 40% axle weight distribution for optimum towing/tracking of trailer. A design of 96 total inches in length would produce a 54" length from the front of the trailer to axle center. Adding an additional 10 inches to the rear of the trailer would then produce a optimum 63" length from the front of the trailer. Extending this trailer by 10 inches would fall into a safe range as long as you take into consideration the weight distribution of the load.
What are the release dates for Svengoolie - 1995 The Long Long Trailer?
Svengoolie - 1995 The Long Long Trailer was released on: USA: 11 November 1995
What does the number 53 stand for on a 18 wheeler?
That's how long the trailer is. The Surface Transportation Assistance Act, which brought the 53-foot trailer into being, required that "53" be put on a 53-foot trailer so people would know it was longer than the then-standard 48-foot trailer, and it would need to swing wider in turns.
Can you fit a queen size mattress in a small travel trailer?
That would depend on the size of your trailer. In order to make sure it fits you should take measurements of your trailer. A standard queen sized mattress measures 60" by 80" so if you trailer is at least that long you should be fine.
How long did it take to build the original great wall of china?
1 year-not done yet brick brick brick
Penske Trailer Rental?
form_title= Penske Trailer Rental form_header= Rent a trailer easily. How long do you need the trailer for?*= _ [50] What will you be using the trailer for?*= _ [50] Have you ever rented a Penske trailer before?*= () Yes () No
How Much Ground Pressure does a Commercial Truck with Trailer have?
When a 80,000 lbs. tractor trailer is setting still and the trailer tandems are double with 34,000 lbs over the axles. How much ground force is under the tandems? Will 5 inches of concreate suport this weight when parked on it for long periods of time?
