0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many 12 AWG current carrying conductors are allowed in a 4 square box?
How deep is the box? (Need to know the volume of the box). It is 2.25 cu in per 12AWG conductor, and it does not matter if it carries current or not.
What is a usb 28 awg 1p plus 24 awg 2c?
28 awg 1p for data, 24 awg 2c for power. i'm searching for differences bteween 1p and 2c code...
How many 10 awg thwn fit in half inch emc conduit?
11
How many feet of 4 awg copper number 1 wire is 1 pound?
7.914 feet
Which has the greatest cross sectional area?
9 AWG
What is ampere rating of a fuse used to protect a 5.5 mm squared conductor?
The equivalent mm2 cross-sectional area of a 5.26 mm2 conductor is a # 10 AWG conductor. A # 10 AWG conductor size is protected by a 30 amp fuse.
What is larger 12 gauge wire or 20 gauge wire?
Yes, a #12 AWG conductor has a greater diameter than a #14 AWG conductor. A #12 conductor has an ampacity of 20 amps whereas a #14 conductor only has an ampacity of 15 amps.
What is the largest solid ( nonstranded ) conductor listed in the wire tables?
10 awg <<>> #8 hard drawn copper conductor
What is the largest size solid conductor permitted to be installed in a raceway?
10 AWG can be solid. 8 AWG and larger should be stranded. 2008 NEC 310.3 2011 NEC 310.106(C)
Which gauge CONDUCTOR is suitable for 20 amps current?
AWG 12/2 with ground.
How many watts can handle 18 AWG wire carry?
A#18 copper conductor with an insulation factor of 90 degrees C is rated at 6 amps.
What size wire needed for 6amps fuse?
AWG 16
What size ground wire for a 400 amp panel in Quebec?
This answer is taken from the CEC. Table 17 states minimum size of grounding conductors. For a service conductor drawing 400 amps a #3 copper grounding conductor is needed. Also see rules 10-206, 10-700 and 10-812 if you have access to the code book.
does 8 gauge wire need to be be purchased as separate wires?
No, there are many manufacturers and distributors who supply 8 AWG wire in multi-conductor cables in stock or custom combinations.
What size wire is required for 325 amp service?
A 350 MCM copper conductor with an insulation rating of 90 degree C is rated at 350 amps.
What size wire do you need for a 150 amp breaker?
A #6 copper ground conductor would be needed.
What gauge wire is needed for a 220 50 amp circuit?
AWG #6
