Volume = (4/3) x pi x r^3
With r = (10.8 / 2) = 5.4, r^3 = 157,464
Volume = 659,24928 cubic inches.
To find the volume of a sphere with a known diameter or radius (which is half the diameter), use the following formula: Asphere = 4/3 pi r3 pi = 3.14 and r = radius For a balloon with a diameter of 12 inches, the radius is 6 inches. Taking that information to the formula, you'll get 25.133 cubic inches (in3).
16 if them.
Approx 246576 cubic inches.
The answer is 38.
The size tree skirt that is needed for a 6-foot Christmas tree is between 50 and 60 inches. The diameter should not go below 45 inches.
A 10-foot round slab at 4 inches requires 1 cubic yard.
Cannot be answered with only these measurements. You need to specify what shape the pool is. Also, for a rectangular pool, the length, width and depth are needed. For a round pool, the diameter and depth are needed.
The answer to this question will require some simple dimensional analysis and geometry. Assuming that he pool is a round above ground pool, 18 feet in diameter and 48 inches deep you first need to calculate the area of the swimming pool in square inches and then multiply by the depth in inches to get the volume in cubic inches: The pool is an 18 foot diameter circle. The diameter in inches of the 18 foot pool is 216 inches (18 feet x 12 inches / foot) The area of a circle = pi (3.1415) x radius x radius The radius = 1/2 of the diameter The area of an 18 foot diameter pool in square inches is: 3.1415 * 108 inches * 108 inches = 36643.5 square inches The volume in cubic inches of an 18 foot diameter pool is: 36643.5 square inches x 48 inches = 1758890 cubic inches. There are 231 cubic inches in one gallon so the volume of an 18 foot diameter, 48 inch deep pool is: 1758890 / 231 = 7,614 gallons If it is a square or rectangular pool simply multiply the length x the width x the average depth.
To inflate the balloon. Whether the gas is helium or just air from your lungs, gases are needed to inflate the balloon.
4 . 8 =32 A cylinder is round and its circular area is dependant on one dimension only - its diameter or radius. If the diameter is 4 inches then the area is Pi/4 x 42 = 4*Pi If the diameter is 8 inches then the area is Pi/4 x 82 = 16*Pi If you needed the surface area and the diameter was 4 inches and the height was 8 inches, then the surface area would be (circumference) x height = (Pi x 4) x 8 = 32*Pi square inches. Of course Pi = 3.14159 to the nearest 5th decimal.
You will require 61 bricks.
The metric system is not needed here. Just lay the bracelet flat and measure it with a fuler or measuring tape.