360 degrees
Any plane can make a 90 degree turn on the z axis and keep flying.
So there are more possibility to fit the wrench.
Starting from the centre, move forward 100 pixels, turn 180 degrees and move forward 100 pixels (returning to the centre). Then turn 120 degrees. Repeat three times. repeat 3 [fd 100 rt 180 fd 100 lt 120]
One full turn of the adjusting wheel on a dividing head is equal to 9 degrees. 40 Turns are equal to 360 degrees which is one full rotation of the head.
Depends on what the voltage is going from - and to.
1080 degrees.
In full turn,there are 360 degrees.
Quarter turn is 90 degrees. Half a turn is 180 degrees. Three-quarter turn is 270 degrees. Full turn is 360 degrees.
1080 degrees
30 degrees
30 degrees
360 degrees
360 degrees
360 degrees
Depending on the wind direction, it can turn 360 degrees!
If you mean a 1/4 of a turn then it is 90 degrees
A full turn is 360 degrees so 180 degrees is half a turn.