In the system most widely used in the United Kingdom, 1 gallon is equal to 160 fluid ounces - similar to there being 16 ounces in a pound. In the system most widely used in the United States, 1 gallon is equal to 128 fluid ounces.
A gallon of gasoline will not get to 600 degrees f. At 536 f it will flare up and explode.
There is not such unit as a "liquid pound" (unlike a liquid ounce, which does exist).To go from a weight in number of pounds of a liquid to a volume in gallons, you need to know the density of the liquid.
Equal to 8 pints. The Imperial gallon was defined in the act of 1824 as the volume of 10lb of water at 62°F. Before this, the gallon was redefined over the years, which is why we have 8 of our gallons to one of our bushels, but the Americans have 9.309177 of their gallons (or 7.751512 of ours) to one of their bushels. To get around this, they have a dry gallon and a liquid gallon, which are different. To summarise: Imperial gallon 277.4192 cubic inches US dry gallon 268.8025 cubic inches US liquid gallon 231 cubic inches.
5 gal = 20 qts 1 gallon = 4 quarts 1 quart = 0.25 gallon
f**k i need this answer too
64 ounces. 1 gallon makes 128 ounces and 1 ounce is 0.0078 gallon in U.S measure. There are 8 ounces in a cup, 2 cups in a pint, 2 pints in a quart and 4 quarts in a gallon. That makes 128 ounces in a gallon US. In UK 20 ounces to the pint, 8 pints to the gallon which makes 160 ounces Imrerial measure.
15 miles to the gallon 15 miles to the gallon
8
It takes 8.33 BTU to raise the temperature of water 1 degree F.
Based on the calculations in the related question (How many cubic feet of water vapor equals 1 pound?) using the Ideal Gas Law, 1 pound of water will be 27.24 cubic feet at 1 atmosphere pressure and 100°C (212°F).1 gallon of water is 8.3454 pounds, so at the temperature 212°F and 1 atmosphere pressure, 1 gallon will generate 227.33 cubic feet.
The closest conversion between the metric and English liquid measurements is 1 liter being 1.057 quarts. This, combined with plenty of conversions, puts 1 gallon at containing 3785.41 milliliters.
This is a rough explanation of how I converted the 50 to 1 mixture for any gas/oil motor down to a recognisable figure in ounces. I just bought a boat that uses this 50 to 1 mixture. I broke it down this way: A. 50 gallons of gas to 1 gallon of oil B. 25 gallons of gas to 1/2 gallon of oil C. 12.50 (12 1/2) gallons of gas to 1/4 gallon (quart) of oil D. 6.25 (6 1/4) gallons of gas to 1/8th gallon (pint) of oil (This is roughly the correct mixture for my boat since it has a 6 gallon tank. I would probably use a hair less of the oil measurement to compensate for the difference between the 6.25 gallon guide number and my boat tank. E. 3 1/2 gallons of gas to 1/2 pint 8 ounces) of oil F.1 3/4 gallons of gas to 1/4 pint of oil (4 ounces) of oil The last mixture I would put in a two gallon gasoline can to use for lawnmowers, gas trimmers, etc that use the 50 to one mixture.
Depends on the temperature of the ice.
1 gallon of water weighs 8.34 pounds. It takes I BTU to change the temp of 1 pound of water 1 degree F. So for 1 gallon it takes 8.34 BTU. It takes 3412.14 BTU to equal 1 KWH. So 8.34 Btu x (1KWH / 3412.14 BTU) = 0.002444 KWH
The 2011 Ford F-150 comes with a standard 26-gallon fuel tank, but it can be upgraded to a 36-gallon tank.
In the US, there are 16 fluid ounces in a cup, so there would be 32 one-ounce servings in 2 cups, or 6.4 five-ounce servings.In the UK, the old (Imperial) cup was 10 Imperial fluid ounces, so there would have been 20 and 4 servings of one-ounce or five-ounces respectively. The Imperial fluid ounce was based on the Imperial gallon, and was equal to the volume of one avoirdupois ounce (weight) of water at 62°F.
A gallon of gasoline will not get to 600 degrees f. At 536 f it will flare up and explode.