First you must determine the area of the room by multiplying the length times the width and then divide by 9 to figure out the square yardage. It is a wise idea to add ten percent to the total to help account for any errors that may occur while installing.
You will need a minimum of 38.6 square yards of carpet to cover that area.
There are 9 square feet in a square yard. An area of 6 feet by 10 feet is a total square area of 60 square feet. To carpet this space you will need 6.67 square yards. However, this may be altered by the fact that the carpet will come in certain widths, and that will determine the actual length of the carpet which is required. For example, if the carpet comes in a width of 10 feet, then there would be no wastage - but if it comes in 8 feet strips then there would be excess involved. Bargain with the retailer.
You would need 280 square feet of carpet.
This will vary by brand and style carpet.
You would need a total of 80 square yards - you would have a piece 24 feet by 2 feet left over.
You will need a minimum of 38.6 square yards of carpet to cover that area.
There are 9 square feet in a square yard. An area of 6 feet by 10 feet is a total square area of 60 square feet. To carpet this space you will need 6.67 square yards. However, this may be altered by the fact that the carpet will come in certain widths, and that will determine the actual length of the carpet which is required. For example, if the carpet comes in a width of 10 feet, then there would be no wastage - but if it comes in 8 feet strips then there would be excess involved. Bargain with the retailer.
You would need 280 square feet of carpet.
Carpet is usually handled in rolls that are 12 feet wide, so 194 linear feet of carpet would be 12 x 194, or 2328 square feet. However, the most common measurement for carpet is square yards in the US, so you would divide 2328 sq. ft. by 9 sq. ft. to get the square yards, about 259. That would be enough carpet to cover an area 16 yards by 16 yards.
There are 9 square feet in a square yard, so you have 6300 square feet of carpet. Each carpet square is 9 square feet (3 x 3 = 9)... So you would need 700 36" tile squares.
This will vary by brand and style carpet.
Just multiply the two together to get area. This would be 900 square feet.
A couple of assumptions have to be made with the information you supply -1. Assuming that each step goes as far forward as it goes up.2. The carpet goes onto the upper floor by the same amount as a tread.If the above assumptions are correct, you would have a total of 12 feet of vertical carpet and 12 feet of horizontal carpet giving a total length of 24 feet.The carpet is 4 feet wide so the total area would be 4 x 24 = 96 square feet
You would need a total of 80 square yards - you would have a piece 24 feet by 2 feet left over.
800 square feet
945 square feet of carpet. (just multiply square yards by nine to get square feet).
180