0
1.2
Wiki User
∙ 11y ago
The volume of a 1-inch diameter pipe with a length of 1 foot is approximately 0.0137 gallons. This calculation is based on the formula for the volume of a cylindrical pipe (πr^2h) where r is the radius of the pipe (0.5 inches) and h is the length of the pipe in feet.
Add your answer:
Earn +20 pts
What is the pressure of a 100 foot height pipe?
The pressure of a pipe at a 100-foot height is dependent on the fluid inside the pipe and the acceleration due to gravity. The pressure can be calculated using the equation P = ρgh, where P is the pressure, ρ is the fluid density, g is the acceleration due to gravity, and h is the height of the column of fluid.
How big pipe is needed for 1 cubic meter per second of water?
The size of the pipe needed for 1 cubic meter per second of water flow depends on the water velocity required and the material of the pipe. Generally, for water flow without excessive pressure drop, a pipe with a diameter between 0.2 to 1.0 meters is adequate. The specific pipe size can be calculated using hydraulic principles considering factors such as flow rate, pressure, and pipe material. Consulting with a hydraulic engineer or using specialized software can help determine the exact pipe size needed.
What are the advantages and disadvantages of a direct cold water system?
Advantages: Instant access to cold water for drinking or cooking, minimal maintenance required compared to a storage tank system, and less energy consumption as water is not constantly being heated. Disadvantages: Limited hot water supply, may not be suitable for larger households or high hot water demand, and potentially lower water pressure than in a storage tank system.
What safety rules should be followed during a fire in a school?
During a fire in a school, students and staff should follow evacuation procedures and calmly exit the building using designated escape routes. It is important to stay low to the ground to avoid smoke inhalation, never use elevators, and proceed to the designated assembly point for accountability. Following the guidance of school staff and emergency responders is crucial to ensure everyone's safety.
How many gallons per foot in eight inch pipe?
2.61153 gallons.
How many gallons in a 3 inch pipe?
0.3672 gallon per foot of pipe.
How many gallons of water will a foot of 3 inch pipe hold?
A three-inch diameter pipe one foot long holds 0.367 gallon.
How many gallons of water per foot will a 12 inch pipe hold?
A 12 inch diameter round pipe will hold 4.89 UK gallons or 5.88 US gallons per foot.
How many gallons of gasoline is in one foot of a 30 inch pipe?
36.7 US gallons.
How many gallons of gasoline is in 1 foot of a 30 inch pipe?
36.7 US gallons.
How many gallons per foot in 4 inch pipe?
0.6528 gallon per foot (rounded)
How many gallons of water per foot in a 28 inch inside diameter pipe?
31.987 gallons per foot.
How many gallons of water per foot will a 5 inch pipe hold?
much water per foot will a 5 inch pipe hold
How many gallons of water in 30 inch pipe per foot?
36.83 u.s. gallons of water in 1 ft. of 30" pipe
How many gallons of water into two and half inch pipe hold?
0.255 gallons per foot of pipe. A 10 ft long pipe that size holds 2.55 gallons.
How many gal per ft in 96 inch pipe?
375.7952 gallons per foot of 96" pipe
