0
How many gallons of water did a steam train need in the 1800s?
Wiki User
∙ 12y ago
The farther they went, the more water they needed.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How is steam used to move ships and trains?
The steam, created by water heated by coal or some other fuel, creates pressure when released into the cylinder, moving the piston, thus moving the train or boat forward or backward.
What was steam powers impact on the environment?
because steam is water and water does not effect the enviroment. although the used to creat steam power is dug up in mines and the mines can be dangerous
How does a steam train work?
Steam engines were the first engine type to see widespread use. They were first invented by Thomas Newcomen in 1705, and James Watt (who we remember each time we talk about "60-watt light bulbs" and the such) made big improvements to steam engines in 1769. Steam engines powered all early locomotives, steam boats and factories, and therefore acted as the foundation of the Industrial Revolution. In this article, we'll learn exactly how steam engines work! = Steam Engine Operation = The following diagram shows the major components of a piston steam engine. This sort of engine would be typical in a steam locomotive.The engine shown is a double-acting steam engine because the valve allows high-pressure steam to act alternately on both faces of the piston. The following animation shows the engine in action:You can see that the slide valve is in charge of letting the high-pressure steam into either side of the cylinder. The control rod for the valve is usually hooked into a linkage attached to the cross-head, so that the motion of the cross-head slides the valve as well. (On a steam locomotive, this linkage also allows the engineer to put the train into reverse.) You can see in this diagram that the exhaust steam simply vents out into the air. This fact explains two things about steam locomotives: * It explains why they have to take on water at the station -- the water is constantly being lost through the steam exhaust. * It explains where the "choo-choo" sound comes from. When the valve opens the cylinder to release its steam exhaust, the steam escapes under a great deal of pressure and makes a "choo!" sound as it exits. When the train is first starting, the piston is moving very slowly, but then as the train starts rolling the piston gains speed. The effect of this is the "Choo..... choo.... choo... choo choo-choo-choo" that we hear when it starts moving. On a steam locomotive, the cross-head normally links to a drive rod, and from there to coupling rods that drive the locomotive's wheels. The arrangement often looks something like this: In this diagram, the cross-head is connected to a drive rod that connects to one of three drive wheels for the train. The three wheels are connected via coupling rods so they turn in unison. = Boilers = The high-pressure steam for a steam engine comes from a boiler. The boiler's job is to apply heat to water to create steam. There are two approaches: fire tube and water tube. A fire-tube boiler was more common in the 1800s. It consists of a tank of water perforated with pipes. The hot gases from a coal or wood fire run through the pipes to heat the water in the tank, as shown here:In a fire-tube boiler, the entire tank is under pressure, so if the tank bursts it creates a major explosion. More common today are water-tube boilers, in which water runs through a rack of tubes that are positioned in the hot gases from the fire. The following simplified diagram shows you a typical layout for a water-tube boiler:In a real boiler, things would be much more complicated because the goal of the boiler is to extract every possible bit of heat from the burning fuel to improve efficiency.
How many gallons does the ocean have?
there are 1.3 sextillon liters or 343 billion billion gallons of water
When did steam train get inveted?
The steam engine, the use of steam has been percolating since old Chinese days of a toylike device filled with water and pipes coming out of its sides hung over a candle spinning like a top. Time enough man gets ideas how to use this and technology advances by the addition of ideas, technical capabilities, and trial and error. A crude steam device was built to pump water out of coal mines. The late 1700's a crude steam locomotive was invented and the first railroads started in the early 1800's with the first early steam engines, and it slowly grows from there. There is no one -definitive- date of a steam train being invented, but it sounds like the start of the application of a "steam locomotive" may have started about the late 1700's. The start of the modern steam era was about 1911 onward where the super power designs were just getting into its start and peaks around world war 2, the start of the diesel locomotive development started the slow demise of the steam locomotive and by around 1960 most railroads had ended mainline steam use. Museums and historical societies today still keep the steam locomotive alive that you can ride behind a real live steam engine still.
What is the difference between a steam boat and a train?
a steam boat is on the water and a train is on railroad tracks
Why does a steam train have to stop during a long journey?
to take on water
What creates steam on a train?
fire heating the water stored into the boiler
What is the difference between steam and coal trains?
There isn't one coal is burnt in the train which heats the water turning it into stream which is pushed through a number of tight pipes building pressure to delivery drive to the wheels.Answer 2- A 'steam train' is a train which is being hauled by a steam powered engine.- A coal train is a train carrying coal. It may be pulled by a steam engine, and so also be a 'steam train', but modern trains are usually hauled by diesel or electric locomotives, and will not be steam trains.
Why does the train have a firebox?
The firebox heats the water and as steam flows the wheels turn.
1000 lbs steam how many gallon water?
The number of pounds in a gallon of water changes with temperature. At 100 degrees Celsius, there is about 8 lbs. per gallon of water. So with one thousand lbs. of steam, we would have around 125 gallons of water.
Gallons of water to wash a car?
A 6 minute car wash and rinse will use up to 60 gallons of water, you should try steam cleaning its much more water efficient.
How do you convert pounds of steam to gallons of condensate?
One pound of steam condenses back to one pound of liquid water. Since one gallon of water weighs 8.337 pounds, simply divide the weight of the condensate by 8.337 to find out how many gallons of condensate you have.
Does a steam train need fuel to work?
Well, it needs energy from somewhere, something to turn water into steam. Can be coal, can be firewood, etc.
Does a train use steam for power?
Steam does create the power to turn the wheels. The steam is created by using coal fire, to heat up the water into steam. the expansion of the steam pushes out the piston, which in turn turns the wheels.
How much water does a steam train need a day?
Depends how much it is going and how fast it is going.
What fuel is used in steam trains?
Coal was burnt in the furnace. This heated water in the boiler to high temperatures. The steam was used to operate the pistons and to drive the train.
