About 208.292013 gallons of water.
45.9 US gallons.
The calculation is: Diameter x Diameter x Depth X 5.9 = Number of Gallons For example: For a 15-foot round pool with a water depth of 3 ft: 15x15x3x5.9 = 3,982 gallons. Since you did not specify the depth of the water, I will provide an answer for a couple of likely depths below. Please note that this is the ACTUAL water depth NOT the height of the pool wall (the water is usually around 6 inchs lower than the wall height). 36 in depth: 3,982 gallons 42 inch depth: 4,646 gallons 48 inch depth: 5,310 gallons ...
150
Over 9,000.
A 12 inch diameter round pipe will hold 4.89 UK gallons or 5.88 US gallons per foot.
A 59.5-inch diameter cylinder holds 1,733 gallons per inch of length/height.
A 24-inch diameter cylinder holds 23.5 gallons of water per foot of length/height.
1.15 gallons of water.
There need not be any water in the pipe.Assuming that it is a 10 inch diameter pipe, then its capacity is 4.08 US gallons.
231 cubic inches = 1 gallon. To find out how many gallons will fill the tank, you must multiply the area of the tank by the depth to find the volume and then divide by 231 to figure how many gallons will fill it: volume of 41 inch dia by 93 inch depth = 122,783.93 cubic inches divided by 231 = 531.532 gallons. PS: I assumed the 41 inches diameter is the inside diameter. If it is the outside diameter, the thickeness of the walls need to be subtracted in order to find the inside diameter for a better calculation. The formula for Area is R (radius = half of diameter) squared X Pi (3.1416).
45.9 US gallons.
The cylinder holds up to 7,943.23 gallons of water.
If 24 inches is the diameter, there are 141,004 gallons of water. If 24 inches is the radius, there are 564,018 gallons of water.
The calculation is: Diameter x Diameter x Depth X 5.9 = Number of Gallons For example: For a 15-foot round pool with a water depth of 3 ft: 15x15x3x5.9 = 3,982 gallons. Since you did not specify the depth of the water, I will provide an answer for a couple of likely depths below. Please note that this is the ACTUAL water depth NOT the height of the pool wall (the water is usually around 6 inchs lower than the wall height). 36 in depth: 3,982 gallons 42 inch depth: 4,646 gallons 48 inch depth: 5,310 gallons ...
A 350-meter section of 76-inch inside diameter pipe has a volume of: 270,500 US gallons of water.
31.987 gallons per foot.
615,142 gallons of water are needed to fill this cylinder.